Results 1 to 6 of 6
Thread: WH vent to draft hood connection
-
10-19-2007, 10:20 AM #1
Clay White Guest
WH vent to draft hood connection
........
Similar Threads:Last edited by Clay White; 01-02-2008 at 02:22 PM.
-
10-19-2007, 11:28 AM #2
Member
- Join Date
- Aug 2007
- Location
- Memphis TN.
- Posts
- 4,311
Re: WH vent to draft hood connection
Clay,
Originally Posted by Clay White
The first section of vent pipe is a 90 degree elbow that has been straightened out.
Looks funny,Sloppy, Lazy but no problem I know of it's rated vent.
Where is the water cut off for wh?
It Might have Choked Artie But it ain't gone'a choke Stymie! Our Gang " The Pooch " (1932)
Billy J. Stephens HI Service Memphis TN.
-
10-19-2007, 04:09 PM #3
Kevin Barre Guest Re: WH vent to draft hood connection
Right there on the inlet to the right opposite the flue. Where the break in the insulation is. Originally Posted by Billy Stephens
-
10-19-2007, 05:05 PM #4
Member
- Join Date
- Mar 2007
- Location
- Connecticut
- Posts
- 1,828
Re: WH vent to draft hood connection
The draft hood has a tapered end for a reason, right. That is so you can shove that sucker right down snug and screw it togeather. Neither of which they got right.
-
10-19-2007, 05:07 PM #5
Member
- Join Date
- Mar 2007
- Location
- Philadelphia PA
- Posts
- 3,177
Re: WH vent to draft hood connection
Needs a single-wall to b-vent adapter at the draft hood I do believe.
"There is no exception to the rule that every rule has an exception." -James Thurber, writer and cartoonist (1894-1961)
www.ArnoldHomeInspections.com
-
10-19-2007, 08:00 PM #6
Kevin Barre Guest Re: WH vent to draft hood connection
I can't see a problem based on this photo. So long as the inner liner of the flue sits properly on the diverter, it looks OK to me.
Reply With Quote
Bookmarks