Results 1 to 13 of 13

Thread: HRV hook up

  1. #1
    Join Date
    Jan 2011
    Location
    Mississauga, Canada
    Posts
    42

    Default HRV hook up

    This was not an actual inspection, but I noticed this in a home a few days ago (see pictures).

    It appears to me that this configuration was incorrect: the two un-insulated connectors are connected to the same return plenum, while the insulated ones are terminated outdoors.

    What do think?20140713_144109.jpg20140713_144136.jpg

    OREP Insurance
    Mike Rodney
    Ontario, Canada

  2. #2
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,042

    Default Re: HRV hook up

    Quote Originally Posted by michael Rodney View Post
    It appears to me that this configuration was incorrect: the two un-insulated connectors are connected to the same return plenum, ...
    I believe the uninsulated ones are air connectors, air connectors have stricter limitations of use than air ducts have.

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  3. #3
    Join Date
    Jan 2011
    Location
    Mississauga, Canada
    Posts
    42

    Default Re: HRV hook up

    Yes but are they supposed to be connected to the same return plenum...about 10 feet apart?

    Mike Rodney
    Ontario, Canada

  4. #4
    Join Date
    Mar 2007
    Location
    Plano, Texas
    Posts
    4,245

    Default Re: HRV hook up

    Here is a diagram that might be useful. Of course with this setup, the HRV fan would have to overcome the static pressure of the furnace fan during furnace operation.
    Your setup basically appears to short cycle the air without doing much good.hrvImage.jpg

    Jim Luttrall
    www.MrInspector.net
    Plano, Texas

  5. #5
    Join Date
    Feb 2009
    Location
    Southern Vancouver Island
    Posts
    4,607

    Default Re: HRV hook up

    The installer thought he would pull some stale air from the furnace return and replace it with fresh, maybe? So somebody ended up paying out a buch of money for something that does a little bit of good maybe on a good day. When the furnace is shut down, it will be a useless waste of electricity. Maybe with a constant flow it will work a bit.
    HRV works best with returns and intakes completely separate from the furnace ducts, IMO, AFAIK.

    Last edited by John Kogel; 07-14-2014 at 06:15 PM.
    John Kogel, RHI, BC HI Lic #47455
    www.allsafehome.ca

  6. #6
    Join Date
    Feb 2008
    Location
    Caledon, Ontario
    Posts
    4,982

    Default Re: HRV hook up

    That is one of three recommended installation methods recommended by manufacturers.
    Simplified Volume Ventilation
    http://www.venmar.ca/DATA/DOCUMENT/1...ES_HRV_ERV.pdf


  7. #7
    Join Date
    Feb 2008
    Location
    Caledon, Ontario
    Posts
    4,982

    Default Re: HRV hook up

    BTW how old is this furnace installation? If its newer the air intake and exhaust for the furnace is now required to be PVC piping and not ABS. But this is why I am asking as to the age of the home/furnace.


  8. #8
    Join Date
    Jan 2011
    Location
    Mississauga, Canada
    Posts
    42

    Default Re: HRV hook up

    Quote Originally Posted by Raymond Wand View Post
    BTW how old is this furnace installation? If its newer the air intake and exhaust for the furnace is now required to be PVC piping and not ABS. But this is why I am asking as to the age of the home/furnace.
    Its just a rough guess but the house maybe about 10 years old. I really do not know for sure.
    It was not an inspection, I just happen to be there and looked up at the HRV.

    Mike Rodney
    Ontario, Canada

  9. #9
    Join Date
    Feb 2008
    Location
    Caledon, Ontario
    Posts
    4,982

    Default Re: HRV hook up

    Okay if thats the age then ABS was the standard. If memory serves me correctly ABS was discontinued for use on furnace 3-4 years ago and new installations or upgrades must now be PVC.


  10. #10
    Join Date
    Jun 2008
    Location
    St. Thomas Ontario, Canada
    Posts
    59

    Default Re: HRV hook up

    636 required on all new installations starting August 1, 2007

    Bryce Jeffrey
    Jeffrey Home Inspection
    St. Thomas, Ontario, Canada

  11. #11
    Join Date
    Feb 2009
    Location
    Southern Vancouver Island
    Posts
    4,607

    Default Re: HRV hook up

    Thanks, Raymond. I've never seen it done that way.

    Simplified Volume Ventilation
    (For homes with forced air heating. See illustration at right.)Fresh air and exhaust air flow through the furnace ducts, which simplifies the
    installation.
    The use of bathroom fans and a range hood is suggested to exhaust stale air.
    NOTE: For this type of installation, the
    furnace blower must be running
    when the unit is in operation.

    If using Method 2, make sure the furnace blower operation is synchronized with the unit operation!
    See Section 5


    John Kogel, RHI, BC HI Lic #47455
    www.allsafehome.ca

  12. #12
    Join Date
    Mar 2007
    Location
    Plano, Texas
    Posts
    4,245

    Default Re: HRV hook up

    Quote Originally Posted by Bryce Jeffrey View Post
    636 required on all new installations starting August 1, 2007
    Would you care to elaborate what "636" means?

    Jim Luttrall
    www.MrInspector.net
    Plano, Texas

  13. #13
    Join Date
    Feb 2008
    Location
    Caledon, Ontario
    Posts
    4,982

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •