Results 1 to 10 of 10
  1. #1
    Join Date
    Mar 2007
    Location
    Capistrano Beach, CA
    Posts
    1,510

    Post Will Technology End Construction Defect Litigation? – How Robotics and 3D Printing Ar

    InspectionNews has found this article about defect litigation or expert witness work that may be of interest to you.



    Will Technology End Construction Defect Litigation? – How Robotics and 3D Printing Are Already Changing the ...
    JD Supra (press release)
    As implausible as it might be, the days for construction defect litigation could be numbered. By 2026, it might be gone for good thanks to exploding technological applications. You might be thinking "well, I've seen many suits involving buildings where ...




    More...

    Similar Threads:
    Inspection Referral
    View The List Of InspectionNews Member Benefits!

    -----------------
    Sincerely,
    Brian Hannigan
    InspectionNews.net / InspectionReferral.com
    Helping Inspectors $ucceed Since 1997TM

    Facebook: https://www.facebook.com/InspectionNews
    Twitter: @InspectionNews

  2. #2
    Join Date
    Mar 2012
    Location
    Lansdale, PA
    Posts
    876

    Default Re: Will Technology End Construction Defect Litigation? – How Robotics and 3D Printin

    So, computer programmers are going to solve the problem of poor construction. I will not be holding my breath waiting for the robotic flashing installer.


  3. #3
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,042

    Default Re: Will Technology End Construction Defect Litigation? – How Robotics and 3D Printin

    The information is interesting ... albeit (in my opinion) a bit hyperbole about the future aspects of robotics in construction.

    I can just see the 3-D printer roll up to the site and 'print' a full-size house on its lots.

    I remember all those sci-fi movies from when I was a kid of rocket ships going to Mars ... it will finally be happening ... soon ...

    But interesting article and good information.

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  4. #4

    Default Re: Will Technology End Construction Defect Litigation? – How Robotics and 3D Printin

    When we meet George Jetson don't forget Astro!

    Jeff Zehnder - Home Inspector, Raleigh, NC
    http://www.jjeffzehnder.com/
    http://carolinahomeinspections.com/

  5. #5
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,042

    Default Re: Will Technology End Construction Defect Litigation? – How Robotics and 3D Printin

    I've been retired from home inspections for over 10 years now, and 20 years ago I was saying that, in the future, home inspectors will drive a tractor trailer up to the front of the house at the street, long arms (robotic arms, would be the term today) would unfold large panels from the sides of the trailer, extend one up and over the house to the back of it, the other panel is placed in front of the house, the home inspector turns the computer on and the house is imaged (MRI, CAT, X-Ray, Thermal, ultra-sound, you name it) and with the client sitting on a chair next to the home inspector, the home inspector points out all the 'problem areas' on a large screen.

    When all is said and done, the home inspector presents the bill to the client - $18,000 ... for a 1 hour scan (including setup time).

    Okay, so I was wrong ... that was 20 years ago ... now it would be '$36,000 please', and 'thank you, and don't forget to recommend us to your friends' ...

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  6. #6

    Default Re: Will Technology End Construction Defect Litigation? – How Robotics and 3D Printin

    Jerry, where can i get one of those trailers?

    Jeff Zehnder - Home Inspector, Raleigh, NC
    http://www.jjeffzehnder.com/
    http://carolinahomeinspections.com/

  7. #7
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,042

    Default Re: Will Technology End Construction Defect Litigation? – How Robotics and 3D Printin

    Quote Originally Posted by Jeff Zehnder View Post
    Jerry, where can i get one of those trailers?
    Still under development ... whenever it sees a roach or mouse it zaps it ... doing pest control at the same time, the current issue is the zapping power is too strong ... tends to burn the house to the ground when zapped ...

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  8. #8
    Join Date
    Feb 2008
    Location
    Chicago IL
    Posts
    2,048

    Default Re: Will Technology End Construction Defect Litigation? – How Robotics and 3D Printin

    I was talking with another inspector recently who is pretty in-tune with what the big national HI chain / franchise outfits are doing or wanting to do. From his conversations, he relayed a few comments about their thinking that went along the lines of this:
    - Their feeling is that HI is too much of a wild west in terms of too many independent guys running their show and keeping all the profits
    - The HI world is seen as a good place for corporations to make a profit margin if they can get rid of the independent guys
    - With that in mind the chains are reportedly working on developing and testing early versions of headsets, software and procedures that allow them to send a guy out who is not really an inspector but just a guy. The guy (or girl) goes out wearing the headset that records everything as he walks around, uses all the equipment to provide testing, scans the interior and all the data is then sent back to some office somewhere where a techie reviews it all and puts together a report.
    Supposedly this is legit and what the big chain outfits want to do.

    www.aic-chicago.com
    773/844-4AIC
    "The Code is not a ceiling to reach but a floor to work up from"

  9. #9
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,042

    Default Re: Will Technology End Construction Defect Litigation? – How Robotics and 3D Printin

    Markus,

    Not sure that would work and be legit in states with licensing.

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  10. #10
    Join Date
    Oct 2010
    Location
    MONTREAL QUEBEC-CANADA
    Posts
    2,075

    Default Re: Will Technology End Construction Defect Litigation? – How Robotics and 3D Printin

    Idle wishful thinking by corporations and franchises wanting more for less.

    I do not think it will ever happen.
    Fred Flintstone,s wheel is still in use today. No quantum leaps in technology.
    Yaba Daba Doooo!
    fred flintstone car.JPG

    Robert Young's Montreal Home Inspection Services Inc.
    Call (514) 489-1887 or (514) 441-3732
    Our Motto; Putting information where you need it most, "In your hands.”

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •