Results 1 to 7 of 7
  1. #1
    Join Date
    Apr 2016
    Location
    Arizona
    Posts
    2

    Default can you splice two hard pipe gas lines using a flex line?

    under manufactured home where the two sides of the house were joined together, are hard pipe gas lines that did not line up, so they joined the two pipes together using flex line.
    Is this to code/legal? is this common? this is in Arizona.
    I am having trouble uploading pictures.

    Similar Threads:
    Member Benefits1

  2. #2
    Join Date
    Feb 2009
    Location
    Southern Vancouver Island
    Posts
    4,607

    Default Re: can you splice two hard pipe gas lines using a flex line?

    I can't be sure whether that connection is permitted by the gas safety authority for your area, or if you even have such a thing. But the usual building code rules probably do not apply.

    If it is permitted by the manufacturer of the home, then that is usually the standard that will be applied, AFAIK. You could ask the building official in your town if the local building code applies to your manufactured home, and specify that it is a gas installation you are concerned about.

    Then you could ask the installers to change the connection to hard pipe. Maybe you smelled gas in the crawlspace?

    John Kogel, RHI, BC HI Lic #47455
    www.allsafehome.ca

  3. #3
    Join Date
    Dec 2007
    Location
    Osceola, AR
    Posts
    311

    Default Re: can you splice two hard pipe gas lines using a flex line?

    Quote Originally Posted by Brian Phelps View Post
    under manufactured home where the two sides of the house were joined together, are hard pipe gas lines that did not line up, so they joined the two pipes together using flex line.
    Is this to code/legal? is this common? this is in Arizona.
    I am having trouble uploading pictures.
    I would have an issue with using an appliance connector in the application, CSST would most likely be OK. All up to the Authority Having Jurisdiction (local code or building official). Attached is an illustration from another inspector (Rueben Saltzman at StructureTech) showing CSST line and a flex appliance connector.

    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    Alton Darty
    ATN Services, LLC
    www.arinspections.com

  4. #4
    Join Date
    Mar 2007
    Location
    Santa Rosa, CA
    Posts
    3,154

    Default Re: can you splice two hard pipe gas lines using a flex line?

    Really common with manufactured/mobile homes. Since the two halves are two units that are connected together, any electrical, gas or plumbing connection needs to be able to flex, at least a bit. In addition, when they marry the two halves together, they need to have a method to connect the gas piping together. Specific information would require contacting the manufacturer.

    Department of Redundancy Department
    Supreme Emperor of Hyperbole
    http://www.FullCircleInspect.com/

  5. #5
    Join Date
    Sep 2010
    Location
    NY Finger Lakes Area
    Posts
    206

    Default Re: can you splice two hard pipe gas lines using a flex line?

    .......all the above comments are correct. The only thing to check, is to determine if the connector was, in fact, the one supplied by the home manufacturer........Greg


  6. #6
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,042

    Default Re: can you splice two hard pipe gas lines using a flex line?

    Hopefully (but unlikely, unless the manufactured home was new) the manufacturer's installation and setup guide is there. Those installation and setup guides specify everything about the installation and setup of the manufactured homes.

    Building codes only address from the connection points (gas, electrical, plumbing, etc) from the manufactured home outward to the site utilities.

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  7. #7
    Join Date
    Oct 2011
    Location
    california
    Posts
    65

    Default Re: can you splice two hard pipe gas lines using a flex line?

    Quote Originally Posted by Jerry Peck View Post
    Hopefully (but unlikely, unless the manufactured home was new) the manufacturer's installation and setup guide is there. Those installation and setup guides specify everything about the installation and setup of the manufactured homes.

    Building codes only address from the connection points (gas, electrical, plumbing, etc) from the manufactured home outward to the site utilities.
    Skyline Corporation manfu Home Installation Manual addresses gas connections between modular units with gas cross over connections using quick disconnect fittings or threaded connectors this is a flex between the marriage line of manfu homes
    Hope this helps answer is flex works if dome properly


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •