Results 1 to 9 of 9

Thread: brick wall

  1. #1
    Join Date
    Aug 2010
    Location
    BC Canada
    Posts
    368

    Default brick wall

    What is the right name of this kind of bricks? Thx

    Similar Threads:
    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    Inspection Referral

  2. #2
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,042

    Default Re: brick wall

    Hard to tell for sure from the photos, but it looks like fake brick, or (for high-flutin folk) faux brick.

    Looks to be adhered thin-brick which is glued on (mortar or some other product for gluing the thin brick to the wall).

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  3. #3
    Join Date
    May 2010
    Location
    No. San Diego Co., CA
    Posts
    562

    Default Re: brick wall

    [QUOTE=Peter Louis;266338]What is the right name of this kind of bricks? Thx[/QUOTE

    As Jerry said, faux manufactured brick veneer, in a stretcher bond pattern, with faux hewn brick piers and lintels applied to an undetermined rigid substrate. Sometimes referred to as 'Lick and stick brick'.


  4. #4
    Join Date
    Aug 2010
    Location
    BC Canada
    Posts
    368

    Default Re: brick wall

    Thank you guys. This is a brick veneer in good shape and solid, which cost over $120,000 on the 4000+ sf home per builder. But I don't like the apperance though it is nothing to inspection.


  5. #5
    Join Date
    Oct 2010
    Location
    MONTREAL QUEBEC-CANADA
    Posts
    2,075

    Default Re: brick wall

    Appears to be brick siding.
    The Quoins look real.

    To assess brick veneer.
    Tap in the veneer with the back of a screw drivers. It will sound hollow.
    Look at the mortar tooling. The jointing.
    Masonry brick veneer with mortar bed head and butt joints are never perfect and the texture will feel like sandpaper.
    Hope that helps.

    Robert Young's Montreal Home Inspection Services Inc.
    Call (514) 489-1887 or (514) 441-3732
    Our Motto; Putting information where you need it most, "In your hands.”

  6. #6
    Join Date
    May 2010
    Location
    No. San Diego Co., CA
    Posts
    562

    Default Re: brick wall

    Quote Originally Posted by ROBERT YOUNG View Post
    Appears to be brick siding.
    The Quoins look real.

    To assess brick veneer.
    Tap in the veneer with the back of a screw drivers. It will sound hollow.
    Look at the mortar tooling. The jointing.
    Masonry brick veneer with mortar bed head and butt joints are never perfect and the texture will feel like sandpaper.
    Hope that helps.
    Quoins are real but 'lick 'n stick' too. Look at the left side of the front arch, you can see a perpendicular mortar joint where the face brick meets the side. Also, the upper left quoin is not supported and just hangs over the (garage?) roof. The top right garage(?) lintel doesn't sit properly at the corner. There are other indicators. Not a bad job - seen worse but it's all in the detail.


  7. #7
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,042

    Default Re: brick wall

    Quote Originally Posted by Peter Louis View Post
    This is a brick veneer in good shape and solid, which cost over $120,000 on the 4000+ sf home per builder.
    Peter,

    See if your client, the contractor (builders are "contractors" too), or anyone took photos of that brick veneer being laid up ... it looks too much like fake brick ('lick n stick') and not enough like real brick veneer.

    Someone did an excellent job of selecting each nearly perfect brick if it is real brick veneer ... there there are the other things, such as that unsupported corner quion Ian pointed out.

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  8. #8
    Join Date
    Oct 2010
    Location
    MONTREAL QUEBEC-CANADA
    Posts
    2,075

    Default Re: brick wall

    Quote Originally Posted by Ian Page View Post
    Quoins are real but 'lick 'n stick' too.
    Look at the left side of the front arch, you can see a perpendicular mortar joint where the face brick meets the side.
    Also, the upper left quoin is not supported and just hangs over the (garage?) roof. The top right garage(?) lintel doesn't sit properly at the corner. There are other indicators. Not a bad job - seen worse but it's all in the detail.
    Not disagreeing, just saying my piece. The Quoins look real.
    As for the detail, I could not extract detail from the image.

    Ian, I take closeups of components on every job using good point and shot camera's. Below would be detail of window sill butt joint, as well as other, mortar bond loss taken with a Sony Cyber-shot HX300 20.4MP 50x Optical Zoom Digital Camera. Then if everything was done right, you get detail.
    brick.jpg


    As for brick siding; only faux masonry veneer I have ever seen, and later repaired, was faux marble from india. The faux marble panels had weight to them.
    The Indian marble panels were 4'x4'x1.1/5" on a church. The panels hung by copper wire onto CMU substrate wall behind. Real marble but faux by quality standards
    The cross Amazonite, from India, and falling off the facade later replaced by a wooden cross.

    Thank you.
    Regards.

    Last edited by ROBERT YOUNG; 05-11-2016 at 12:10 AM.
    Robert Young's Montreal Home Inspection Services Inc.
    Call (514) 489-1887 or (514) 441-3732
    Our Motto; Putting information where you need it most, "In your hands.”

  9. #9
    Join Date
    Oct 2010
    Location
    MONTREAL QUEBEC-CANADA
    Posts
    2,075

    Default Re: brick wall

    Nail fastened brick siding. Referred to as faux brick.
    Fake Brick Siding | Low Maintenance, Classic Brick Look

    Ian, The inside vertical perpendicular bond line on the column under the front arch can be achieved with real stone units if that was what you were referring to but what do you mean by lick and stick? Adhesive stick on panels?

    What struck me odd about the image, the running bond is too perfect.
    You would have string line the layout like a grid every ><16" to achieve that perfection.
    There would be little room to lay out your mortar, ferrow the bed, and lay out the brick, let alone pass you 4' level to tap out your brick course level.
    It would be like trying to lay brick with a fishing net in front of you.

    Robert Young's Montreal Home Inspection Services Inc.
    Call (514) 489-1887 or (514) 441-3732
    Our Motto; Putting information where you need it most, "In your hands.”

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •