Results 1 to 12 of 12
  1. #1
    Join Date
    Aug 2008
    Location
    Pleasant Hill, Iowa
    Posts
    145

    Default They called this Tuck-pointing

    Owner had a home inspection for the bank to re-finance the house, HI was not me, the bank told the owner to have the tuck-pointing done before they would re-finance his mortgage. The owner did the work and then called me as a third part HI to say the tuck-pointing has been completed. This is what I found;
    1. Didn't clean out all the loose mortar
    2. Didn't use a sand mortar mix at 2:1 ratio
    3. Used two different kinds of mix, a concrete patch (latex bond), and Water TiTe (hydraulic cement)

    And they want me to say it has been completed! Very rough and I think they have used the wrong method and material.

    Similar Threads:
    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    Member Benefits1
    Dan Hagman ACI
    ProSite Home Inspections
    Des Moines, Iowa

  2. #2
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,042

    Default Re: They called this Tuck-pointing

    Quote Originally Posted by Dan Hagman View Post
    The owner did the work and then called me as a third part HI to say the tuck-pointing has been completed.
    .
    .
    .
    And they want me to say it has been completed!
    "Well, yeah, that's what we're paying you for." says the owner.

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  3. #3
    Join Date
    Feb 2008
    Location
    Caledon, Ontario
    Posts
    4,982

    Default Re: They called this Tuck-pointing

    Dan
    I would not put my stamp of approval on the work being proper or professionally carried out.
    Who did the red paint?


  4. #4
    Join Date
    Aug 2008
    Location
    Pleasant Hill, Iowa
    Posts
    145

    Default Re: They called this Tuck-pointing

    Good one Jerry! Lol

    Raymond, I don't know about the red paint but is sure made it stand out.
    From what I am reading they should have used sand and Portland Cement properly mixed and removed all loose mortar and properly tuck-pointed the mortar joints. I can't write off on this the way it is. I am not suppose to instruct them on how to repair it, just point out what is wrong and they need to hire a professional Mason.

    Dan Hagman ACI
    ProSite Home Inspections
    Des Moines, Iowa

  5. #5
    Join Date
    Feb 2008
    Location
    Caledon, Ontario
    Posts
    4,982

    Default Re: They called this Tuck-pointing

    Yup hire a professional.
    That red paint sure is odd, never seen anything like it.


  6. #6
    Join Date
    Mar 2012
    Location
    Lansdale, PA
    Posts
    876

    Default Re: They called this Tuck-pointing

    It puts you in a difficult position when asked to approve work like that, but calling for repointing in that case was not necessary IMO.


  7. #7
    Join Date
    Oct 2010
    Location
    MONTREAL QUEBEC-CANADA
    Posts
    2,075

    Default Re: They called this Tuck-pointing

    Quote Originally Posted by Dan Hagman View Post
    Owner had a home inspection for the bank to re-finance the house, HI was not me, the bank told the owner to have the tuck-pointing done before they would re-finance his mortgage. The owner did the work and then called me as a third part HI to say the tuck-pointing has been completed. This is what I found;
    1. Didn't clean out all the loose mortar
    2. Didn't use a sand mortar mix at 2:1 ratio
    3. Used two different kinds of mix, a concrete patch (latex bond), and Water TiTe (hydraulic cement)

    And they want me to say it has been completed! Very rough and I think they have used the wrong method and material.
    You clean out/grind out 5/8" with diamond blade pointer wheel.
    Rake out the soft mortar carefully in areas that show much degrading.
    If you used hydrolic cement on my job you would be going home.

    Now to the images:
    The bricks as well as the bed, head and butt joints were originally painted over.
    Not a good idea. It will seal in moisture and degrade the mortar and masonry as well as keep the humidity higher in the wall assembly.

    It is plan to see the owner used spray paint.

    It is usually 3:1 ratio. Three shovels of sand to one shovel of type N masonry.
    A flat digging or spade shovel will do.
    I used a 5 gallon pale and dies.
    1:1:3 would be traditional lime masonry. 1: Portland 1: S lime 3: sand.
    In a pinch you can use Portland cement mix on soft mortar joints. 1: Type I Portland, 4 sand.


    Quote Originally Posted by Mark Reinmiller View Post
    It puts you in a difficult position when asked to approve work like that, but calling for repointing in that case was not necessary IMO.
    I agree.

    I do not mean to correct you but the tradition verbiage would be pointing, not re-pointing.
    When the bricks are laid you tool a relief.
    You might strike an angle or iron the mortar convex or concave.
    There are many relief patterns. I think I had 8 irons and my pointing trowel was used for 2 more patterns.
    joint refief.JPG
    When repairing head, bed and butt joints you point them after removing degraded mortar.

    Last edited by ROBERT YOUNG; 09-06-2016 at 05:59 PM.
    Robert Young's Montreal Home Inspection Services Inc.
    Call (514) 489-1887 or (514) 441-3732
    Our Motto; Putting information where you need it most, "In your hands.”

  8. #8
    Join Date
    Aug 2008
    Location
    Pleasant Hill, Iowa
    Posts
    145

    Default Re: They called this Tuck-pointing

    Robert, thanks for all the information!

    Dan Hagman ACI
    ProSite Home Inspections
    Des Moines, Iowa

  9. #9
    Join Date
    Oct 2010
    Location
    MONTREAL QUEBEC-CANADA
    Posts
    2,075

    Default Re: They called this Tuck-pointing

    Quote Originally Posted by Dan Hagman View Post
    Robert, thanks for all the information!
    Quite welcome.
    I look for proper narratives as try to help when I can.

    Robert Young's Montreal Home Inspection Services Inc.
    Call (514) 489-1887 or (514) 441-3732
    Our Motto; Putting information where you need it most, "In your hands.”

  10. #10
    Join Date
    Mar 2007
    Location
    Chicago, IL
    Posts
    2,797

    Default Re: They called this Tuck-pointing

    BTW, that's repointing, not tuck pointing:

    https://en.wikipedia.org/wiki/Tuckpointing

    Michael Thomas
    Paragon Property Services Inc., Chicago IL
    http://paragoninspects.com

  11. #11
    Join Date
    Oct 2010
    Location
    MONTREAL QUEBEC-CANADA
    Posts
    2,075

    Default Re: They called this Tuck-pointing

    Quote Originally Posted by Michael Thomas View Post
    BTW, that's repointing, not tuck pointing:

    https://en.wikipedia.org/wiki/Tuckpointing
    Not to correct you or wiki, seeing both can be swayed with misinformation and trades slang but;what is being repointed? The pointing? Poor restoration, restorative masonry practice e to go over pointing.

    What is pointing?

    Creagh House : Pointing The Weathered 18th Century Masonry Wall

    Also know as tuckpointing. I had many pointers. Over 20 at one time.
    I enjoy masonry restorative work.

    Last edited by ROBERT YOUNG; 09-12-2016 at 04:58 AM.
    Robert Young's Montreal Home Inspection Services Inc.
    Call (514) 489-1887 or (514) 441-3732
    Our Motto; Putting information where you need it most, "In your hands.”

  12. #12
    Join Date
    Oct 2010
    Location
    MONTREAL QUEBEC-CANADA
    Posts
    2,075

    Default Re: They called this Tuck-pointing

    Now that link is likely English, European traditional masonry pointing.
    They allow up to a 1" rake of existing mortar.
    It also depends on other wall elements, cobbled/reset relief work.
    Also if the bricks are frogers, full brick.
    Depends on the wythe.

    Too mush to know about masonry.
    Not much information from traditional masons.

    I looked for brickies from England or Australia.
    Good chance they are traditionally traded.
    That means pub after work.
    Oh no...!

    Quebec masonry union allows 5/8' raking only.
    I had apprentices. I mentored apprentices.

    Robert Young's Montreal Home Inspection Services Inc.
    Call (514) 489-1887 or (514) 441-3732
    Our Motto; Putting information where you need it most, "In your hands.”

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •