Results 1 to 5 of 5
			
		Thread: Spark arrestor
- 
	12-10-2007, 04:06 PM #1 Spark arrestor Spark arrestorLast edited by Jeff Eastman; 12-19-2007 at 02:54 PM. 
 
- 
	12-11-2007, 07:51 AM #2 Re: Spark arrestor Re: Spark arrestorMy though is that if it's clamped on tight enough to withstand high winds, the point-force at the flue tile might predispose it to cracks. 
 
 
- 
	12-11-2007, 08:06 AM #3 Re: Spark arrestor Re: Spark arrestorWe have hundreds of them. The clamps hold ok, but, the rest of it corrodes and disintegrates after a few years. Flashing doesn't have any glaring defects - the crown perimeter may allow water penetration to the chase. 
 
 
- 
	12-11-2007, 08:15 AM #4 Re: Spark arrestor Re: Spark arrestorThe flashing appears to be a 2 piece saddle and appears to be in good shape. However I would be concerned with seal at brick line. 
 
 
- 
	12-11-2007, 10:46 AM #5 Re: Spark arrestor Re: Spark arrestorChimney caps with 5/8" mesh or with 3/4" mesh: What's the Difference? 
 
 Here is more info.
 
 Also - google - chimney spark arrestor
 
 


 
 
						
					
 
				
				
				
					 Reply With Quote
  Reply With Quote 
					
					
Bookmarks