Results 1 to 13 of 13

Thread: Attic issues

  1. #1
    Join Date
    Sep 2007
    Location
    San Antonio TX
    Posts
    88

    Default Attic issues

    Do you think purlin needs additional support pic #1 and
    Picture #2 and #3 proper description needed.
    Thanks

    Similar Threads:
    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    Last edited by Zibby Swieca; 12-14-2007 at 07:11 AM.
    Crawl Space Creeper

  2. #2
    Join Date
    Aug 2007
    Location
    Memphis TN.
    Posts
    4,311

    Default Re: Attic issues

    Quote Originally Posted by Zibby Swieca View Post
    Do you think purlin needs additional support pic #1 and
    Picture #2 and #3 proper description needed.
    Thanks
    Zibby,

    Picture 1: Without looking at the plans? (Is that the install instructions stuck in the rafters?

    Picture 2 & 3 Gusset Plate is not correctly centered to support all of the members and support needs reattached. End of rafter not fully supported by truss.

    Last edited by Billy Stephens; 12-13-2007 at 10:51 PM. Reason: Changed 2&3
    It Might have Choked Artie But it ain't gone'a choke Stymie! Our Gang " The Pooch " (1932)
    Billy J. Stephens HI Service Memphis TN.

  3. #3
    Join Date
    Mar 2007
    Location
    Santa Rosa, CA
    Posts
    3,154

    Default Re: Attic issues

    What is with the 2x4s on the flat? I just do not get it.

    Department of Redundancy Department
    Supreme Emperor of Hyperbole
    http://www.FullCircleInspect.com/

  4. #4
    Join Date
    Mar 2007
    Location
    Lake Barrington, IL
    Posts
    1,367

    Default Re: Attic issues

    Unorthodox, non-professional workmanship. Improper bearing and fastening details.

    That should sum it up quite well.

    Eric Barker, ACI
    Lake Barrington, IL

  5. #5
    Join Date
    Sep 2007
    Location
    San Antonio TX
    Posts
    88

    Default Re: Attic issues

    Thanks


  6. #6
    Join Date
    Mar 2007
    Location
    Spring Hill (Nashville), TN
    Posts
    5,851

    Default Re: Attic issues

    Is that a modular or a manufactured home? Just curious as yo just don't see 2x4's used like that in residental construction.

    Scott Patterson, ACI
    Spring Hill, TN
    www.traceinspections.com

  7. #7
    Join Date
    Sep 2007
    Location
    San Antonio TX
    Posts
    88

    Default Re: Attic issues

    Scott
    This is regular home build by KB.
    2x4's I see them often used that way.
    I did exactly the same home 2 days ago in different part of town and they use 2x4's the same way.
    What surprised me I found very little problems on both homes 2-3 years old $150.000.


  8. #8
    Join Date
    Oct 2003
    Location
    Rockwall Texas
    Posts
    4,521

    Default Re: Attic issues

    KB, says it all.

    If your inspecting those, don't let your E&O lapse for sure.


  9. #9
    Dan Blanchard's Avatar
    Dan Blanchard Guest

    Default Re: Attic issues

    That was a good one Rick!


  10. #10
    Join Date
    Mar 2007
    Location
    Bradley Illinois
    Posts
    30

    Default Re: Attic issues

    This is an engineered hip roof truss system. Additional support is not needed. The 2x4's on the flat is on the end hip section where the step down trusses are dropped 1 1/2" for a flat framed truss to compensate for the step down. This is a system designed by engineers for the truss manufacturer and the drawings have to have an engineers stamp for AHJ approval. Having installed such systems, I have found this is a much better way to support the sheathing than to turn it 90 degrees and have the possibility of misaligned joints.


  11. #11
    Join Date
    Mar 2007
    Location
    Lake Barrington, IL
    Posts
    1,367

    Default Re: Attic issues

    Steve,

    I think I know what you're talking about and I have had an engineer say that this can be ok if designed as such. In the attached this was only at the peak sections of the roof. All other areas had the 2x4s vertically. Zibby's pictures seem to involve a much larger area. Is your understanding that the 2x4s can be laid flat throughout the entire roof?

    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    Last edited by Eric Barker; 12-18-2007 at 06:26 AM. Reason: Re-phrasing.
    Eric Barker, ACI
    Lake Barrington, IL

  12. #12
    Join Date
    Mar 2007
    Location
    Chicago, IL
    Posts
    2,797

    Default Re: Attic issues

    In Eric's picture, to what extent could you substitute clips "or other approved edge support" and still meet the IRC and the APA guidelines?

    Michael Thomas
    Paragon Property Services Inc., Chicago IL
    http://paragoninspects.com

  13. #13
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,042

    Default Re: Attic issues

    Quote Originally Posted by Michael Thomas View Post
    In Eric's picture, to what extent could you substitute clips "or other approved edge support" and still meet the IRC and the APA guidelines?
    I see what looks like a clip mid-span at the wider spacing, however, what I think you are asking is about 'end support' rather than 'edge support'.

    Am I correct?

    The last time I read through the APA stuff, all structural panel 'ends' must land on framing and be attached to framing.

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •