Results 1 to 3 of 3
Thread: Funky-looking epdm
-
09-12-2019, 06:44 AM #1
-
09-12-2019, 08:23 AM #2
Re: Funky-looking epdm
Those bubbles are likely caused by misapplication - not completely bonded/adhered to the deck; moisture in the deck before installation was not allowed to dry out; leaking some where allowing moisture to migrate in under the EPDM or the roof deck; etc
-
09-12-2019, 04:00 PM #3
Re: Funky-looking epdm
Department of Redundancy Department
Supreme Emperor of Hyperbole
http://www.FullCircleInspect.com/
Bookmarks