Results 1 to 4 of 4
Thread: Flir T420 overlay question
-
10-28-2020, 01:51 PM #1
Flir T420 overlay question
Hi guys, many years ago I bought this camera from UI while taking level 1 training, roof-scan training and equine training, thinking I was going to make bucket loads of money (haha). So when that didn't happen, I decided to pull it out for a really quick scan during my regular home inspections, more so to cover my own ass. I've only charged an extra fee a handful of times. My question is how do I get rid of the [FOV 45 deg] overlay shown at bottom left of my image ?
I've read a pdf instructional manual which mentions FOV but not how to turn it off from displaying. I contacted Flir tech support but they come back with programming my button to hide graphics, which works but it turns off all graphics. I still want the temp-scale to remain on screen.
Anyone have any experience with this ?
Similar Threads:
-
11-25-2020, 08:47 AM #2
Re: Flir T420 overlay question
I have also the same question about it. My office had this camera too.
-
05-10-2021, 08:30 PM #3
Re: Flir T420 overlay question
Let me check mine... I think I know.
Mazza Inspections and stuff...
https://mazzainspections.com
https://waterintrusionspecialist.com
-
05-11-2021, 05:46 PM #4
Re: Flir T420 overlay question
Bookmarks