Results 1 to 2 of 2
-
03-17-2022, 12:45 PM #1
Permitting new knob-and-tube wiring
The NEC explicitly permits running new concealed knob-and-tube (K&T) wiring for extending existing K&T circuits. In what seems to me anomalous language, it reduplicates part of 90.4 by saying the AHJ may permit K&T for other wiring by special permission. I suppose this could be for a new circuit, or even for extending a non-K&T circuit. (At least there you'd have a good place to pick up a ground wire.) So it is writ.
Some years ago, chatting with a Southron colleague, I was told that in his jurisdiction K&T was permitted simply because they had enough flooding that they preferred a wiring method that would dry out and be usable again without having to worry about contaminants bridging between conductors the entire length of a cable or raceway. Who? When? I don't remember.
Does any of you know of jurisdictions where this is or has been the case, perhaps as a local amendment in the adopting legislation?
Similar Threads:
-
03-17-2022, 05:09 PM #2
Re: Permitting new knob-and-tube wiring
Bookmarks