Results 1 to 9 of 9

Thread: Pool Lights

  1. #1
    Join Date
    Mar 2007
    Location
    Tampa, Fl
    Posts
    155

    Default Pool Lights

    Are pool lights required to be GFCI protected if they are low voltage? I see two types of pool panels which are typically manufactured by intermatic. The first have a transformer for the pool light, but no GFCI reset. The second have a GFCI or "low voltage circuit protector" as they call them on the panel label.

    Similar Threads:
    Member Benefits1

  2. #2
    Join Date
    Oct 2003
    Location
    Rockwall Texas
    Posts
    4,521

    Default Re: Pool Lights

    All pool lights should be GFCI protected.


  3. #3
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,042

    Default Re: Pool Lights

    Quote Originally Posted by Rick Hurst View Post
    All pool lights should be GFCI protected.
    Except (drum roll ) optical fiber ones where the lights are not actually even in the pool, or anywhere close to the pool.

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  4. #4
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,042

    Default Re: Pool Lights

    Quote Originally Posted by Matthew Barnicle View Post
    The second have a GFCI or "low voltage circuit protector" as they call them on the panel label.
    Then I would not call them "GFCI" protected. "Low voltage circuit protector" has nothing to do with GFCI protection as I take the term, to me, that indicates it is there to protect the equipment and its low voltage circuit.

    If it was "GFCI" protection, it would state "GFCI" or "Ground-fault Circuit Interrupter" on it.

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  5. #5
    Richard Rushing's Avatar
    Richard Rushing Guest

    Default Re: Pool Lights

    As Rick stated... it needs to be GFCI protected.

    rr


  6. #6
    Greg Bertaux, P.E.'s Avatar
    Greg Bertaux, P.E. Guest

    Default Re: Pool Lights

    From an article I published recently, GFCIs are required in the following locations:

    - All bathroom receptacles
    - All kitchen and counter receptacles
    - Garage and unfinished basement receptacles
    EXCEPT ones that are not readily accessible or that
    serve an appliance not readily moved.
    - All exterior receptacles
    - All crawlspace receptacles
    - All boathouse receptacles
    - Receptacles within six feet of a laundry or wet bar sink
    - Whirlpool tub motors
    - Spas and fountains
    - 120 volt swimming pool lights

    However, I agree that GFCIs for 12V lighting around pools ought to be recommended.


  7. #7
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,042

    Default Re: Pool Lights

    Greg,

    Here is a list I've been publishing since, well, a long time, and update to each new NEC edition.

    Attached Files Attached Files
    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  8. #8
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,042

    Default Re: Pool Lights

    While I am at at it:

    Attached Files Attached Files
    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  9. #9
    William Brady's Avatar
    William Brady Guest

    Default Re: Pool Lights

    Jerry thank you for tha page I will keep it on my clipboard.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •