homemade handle tie

[Jerome W. Young]

What can i say about this? It is actually hitting the adjacent breaker so it wouldnt trip.

Similar Threads:

• BlowerDoor Homemade
• No main handle
• Valve handle position
• Homemade Damper Handle
• improper handle tie on different amp breakers

[Jerry Peck]

What can i say about this?

Want the short response or the long one?

[Paul Kondzich]

HAHA Jerry, dont feel like typing today????

[Jerome W. Young]

I like long explanations so I can make a good story. I just want to make sure i covered all the basis.

[Gunnar Alquist]

Homemade handle tie. Seems simple enough. Replace with an approved handle tie.

[Jerry Peck]

Homemade handle tie. Seems simple enough. Replace with an approved handle tie.

Also, the homemade handle tie keeps one from shutting the breaker off, which may allow them to safe the life of someone or prevent a fire, thereby saving the life of one or more people. While that person is trying to shut off the power to prevent a fire, another person may die trying to save the other persons in the house, leading to the death of even more people. The end result being that firefighters may be overcome by some inhalation while fighting the fire, injuring even more people. The firefighters blocking off the street may cause a rescue unit to have to be re-routed, leading to the death of a person the rescue unit was attempting to reach, or was trying to get to the hospital in time.

Only approved and manufacturer specific handle ties are allowed.

[Gunnar Alquist]

JP,

Uhhh... I think you might have forgotten the explosion from the gas main caused by said fire that wiped out the entire east side of town.