Results 1 to 9 of 9
  1. #1
    Jerome W. Young's Avatar
    Jerome W. Young Guest

    Default circuit wires in front of main service wires

    how about this one Jerry? Is it a big deal. I am going to tell them to have an electrician try again.

    Similar Threads:
    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    Member Benefits1

  2. #2
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,042

    Default Re: circuit wires in front of main service wires

    Not a "big deal" but that electrician, Mr. Joe Cool, needs to take off his shades when he works inside ... so he can see what he is doing.

    Or, maybe he was wearing his welder's glasses ... you know ... 'just in case'.

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  3. #3
    Richard Abrams's Avatar
    Richard Abrams Guest

    Cool Re: circuit wires in front of main service wires

    Extremely poor workmanship


  4. #4
    Byron Lentz's Avatar
    Byron Lentz Guest

    Default Re: circuit wires in front of main service wires

    That's what happens when people get in a hurry.


  5. #5
    Norm Grande's Avatar
    Norm Grande Guest

    Smile Re: circuit wires in front of main service wires

    Isn't that wirenut in the panel an issue, as well? In Canada the code doesn't allow connections in a panel. I imagine US code won't allow either?


  6. #6
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,042

    Default Re: circuit wires in front of main service wires

    Quote Originally Posted by Norm Grande View Post
    Isn't that wirenut in the panel an issue, as well? In Canada the code doesn't allow connections in a panel. I imagine US code won't allow either?
    Depends on where the wires go.

    If the wires are simply spliced longer and go to a terminal in the panel, that is okay.

    If the wires are spliced together and continue on through the panel going out to something else, that is not okay.

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  7. #7
    Join Date
    Oct 2009
    Location
    michigan
    Posts
    421

    Default Re: circuit wires in front of main service wires

    Installation does not meet code.
    The (dare I say it) manufacturer intends the conductors to be routed outside of the 'conductor guides', seen in the photo as plastic protrusions on either side of the panel.

    If it is necessary for the conductors to cross over one side to the other, they must run clear of the service conductor terminations; yet, no conductors can run inside the conductor guides.
    Bob Smit, County EI


  8. #8
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,042

    Default Re: circuit wires in front of main service wires

    Quote Originally Posted by bob smit View Post
    Installation does not meet code.
    The (dare I say it) manufacturer intends the conductors to be routed outside of the 'conductor guides', seen in the photo as plastic protrusions on either side of the panel.

    If it is necessary for the conductors to cross over one side to the other, they must run clear of the service conductor terminations; yet, no conductors can run inside the conductor guides.
    Bob Smit, County EI
    Quote Originally Posted by Jerry Peck View Post
    Not a "big deal" but that electrician, Mr. Joe Cool, needs to take off his shades when he works inside ... so he can see what he is doing.

    Or, maybe he was wearing his welder's glasses ... you know ... 'just in case'.

    Bob,

    That's what I was referring to ... an easy fix, but be careful about doing some unintentional spot welding moving those wires around.

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  9. #9
    Join Date
    Oct 2009
    Location
    michigan
    Posts
    421

    Default Re: circuit wires in front of main service wires

    I hear U Jerry. Just wanted to point out the wire guides.
    As related to 'crossing over'; most panelboards have lug pockets of one sort or another, so we usually don't have to concern ourselves with conductors rubbing on service terminations.
    Bob Smit, County EI


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •