Results 1 to 16 of 16

Thread: Weaved valley

  1. #1
    jeff king's Avatar
    jeff king Guest

    Cool Weaved valley

    one side of the roof is 8/12 and the other side is 10/12. Using ELK(no tabs) shingles. Weaving valley.How many courses up do i go before i double row to keep the parting line in the center of valley?And which pitch or side of roof should i start the first shingle? In otherwords which pitch should be on the bottom of weave? thanks, any help would be fine

    Similar Threads:
    Last edited by jeff king; 03-13-2008 at 01:56 PM. Reason: put closed instead of weaving
    Member Benefits1

  2. #2
    Join Date
    Mar 2007
    Location
    Spring Hill (Nashville), TN
    Posts
    5,851

    Default Re: Weaved valley

    Quote Originally Posted by jeff king View Post
    one side of the roof is 8/12 and the other side is 10/12. Using ELK(no tabs) shingles. Weaving valley.How many courses up do i go before i double row to keep the parting line in the center of valley?And which pitch or side of roof should i start the first shingle? In otherwords which pitch should be on the bottom of weave? thanks, any help would be fine
    Hi Jeff, you might want to contact ELK customer service. Depending on which style you have they might not recommend a woven valley. I bet that they can shoot you the instructions via email. Weaving a valley is an art and if done wrong it will leak.

    Last edited by Scott Patterson; 03-13-2008 at 02:39 PM.
    Scott Patterson, ACI
    Spring Hill, TN
    www.traceinspections.com

  3. #3
    jeff king's Avatar
    jeff king Guest

    Default Re: Weaved valley


  4. #4
    jeff king's Avatar
    jeff king Guest

    Default Re: Weaved valley

    Well?

    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images

  5. #5
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,042

    Default Re: Weaved valley

    Quote Originally Posted by jeff king View Post
    Well?
    I'm surprised they did not fall off the roof being that drunk.

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  6. #6
    jeff king's Avatar
    jeff king Guest

    Default Re: Weaved valley

    Well It's been a year know , no leaks .

    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    Last edited by jeff king; 09-18-2008 at 08:59 AM.

  7. #7
    Richard Rushing's Avatar
    Richard Rushing Guest

    Default Re: Weaved valley

    To answer, the higher or steeper slope should be overlapping the bottom.

    JP-- that was a great reply!!
    LMAO


  8. #8
    jeff king's Avatar
    jeff king Guest

    Question Re: Weaved valley

    No help whatsoever, why are you on here?


  9. #9
    jeff king's Avatar
    jeff king Guest

    Smile Re: Weaved valley

    Thank you Scott your advice was very helpful, could'nt have done it without it.


  10. #10
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,042

    Default Re: Weaved valley

    Quote Originally Posted by jeff king View Post
    No help whatsoever, why are you on here?

    Let's see ... this is coming from someone with 6 posts - all of which are on this one thread ...

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  11. #11
    jeff king's Avatar
    jeff king Guest

    Thumbs down Re: Weaved valley

    Are you a monday morning armchair quarterback? You sure act like one.


  12. #12
    Join Date
    Mar 2007
    Location
    Spring Hill (Nashville), TN
    Posts
    5,851

    Default Re: Weaved valley

    Quote Originally Posted by jeff king View Post
    Thank you Scott your advice was very helpful, could'nt have done it without it.
    Glad to have helped. But I must agree with Jerry & Richard, the valley is not woven correctly from what I can tell in the pictures. A while back somebody posted a picture of a correctly woven valley, it would be great to find that picture and look at the difference in it and yours.

    With that heavy of a shingle it might have been better to have gone with a cut valley. Weaving dimensional shingles like you have is very difficult.

    Scott Patterson, ACI
    Spring Hill, TN
    www.traceinspections.com

  13. #13
    Join Date
    Mar 2007
    Location
    Spring Hill (Nashville), TN
    Posts
    5,851

    Default Re: Weaved valley

    I found the picture of the valley. It is from Roger Robinson's company in CA, Star Inspections. Now this is a 3 tab shingle but the valley part should look the same.

    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    Scott Patterson, ACI
    Spring Hill, TN
    www.traceinspections.com

  14. #14
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,042

    Default Re: Weaved valley

    Quote Originally Posted by jeff king View Post
    Are you a monday morning armchair quarterback? You sure act like one.

    Nope.

    You get to play in the big game.

    I only get to come in and show you where you are wrong ... in front of the judge.

    If you come to learn, or help teach, do so. If you come to criticize ... we can all play that game together, and you will lose.

    Besides, now that you are playing 'that' game ... it is not "Weaved valley", it is "woven valley".

    And "monday" is "Monday".

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  15. #15
    Join Date
    Mar 2007
    Location
    Bradley Illinois
    Posts
    30

    Default Re: Weaved valley

    Woven valley = Sure Leak. Bad choice in snow country for sure, and I believe equally bad everywhere.

    Having done roofing for 35 Years, I have never found one that I removed for reroofing that had not leaked.

    Bad choice, bad choice, bad choice.


  16. #16
    Join Date
    Mar 2007
    Location
    Fuquay Varina, NC
    Posts
    1,074

    Default Re: Weaved valley

    When you have two diffrent pitches always start with the low pitch side first. When the shingles are woven they will cross each other in the center of the valley. The "cross" or where they overlap and kind of looks like a "X" will drift out of the center of the valley after a few courses and then you have to double the low side before bringing the high side over to bring that back to center.

    Mike Schulz License 393
    Affordable Home Inspections
    www.houseinspections.com

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •