Results 1 to 8 of 8
  1. #1
    Join Date
    Mar 2007
    Location
    Oklahoma City
    Posts
    357

    Default What caused this

    I was wanting some opinions as to what might have caused this. Hydrostatic pressure causing a crack? Poor concrete work? Most of the foundations we inspect are covered with brick veneer so we don't see that many exposed stem walls other than the garage. Of the ones I do see, I don't recall ever seeing this. There were no cracks or signs of movement in or outside the 35 yr old house.

    Similar Threads:
    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    Last edited by Frank Bombardiere; 06-03-2008 at 06:43 PM. Reason: add pic
    OREP Insurance
    If it weren't for lawyers, we would never need them.

  2. #2
    Join Date
    Aug 2007
    Location
    Memphis TN.
    Posts
    4,311

    Default Re: What caused this

    Quote Originally Posted by Frank Bombardiere View Post
    I was wanting some opinions as to what might have caused this. Hydrostatic pressure causing a crack? Poor concrete work? Most of the foundations we inspect are covered with brick veneer so we don't see that many exposed stem walls other than the garage. Of the ones I do see, I don't recall ever seeing this. There were no cracks or signs of movement in or outside the 35 yr old house.
    Looks like just the outside Parge coating is cracking and not the foundation.

    It Might have Choked Artie But it ain't gone'a choke Stymie! Our Gang " The Pooch " (1932)
    Billy J. Stephens HI Service Memphis TN.

  3. #3
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,042

    Default Re: What caused this

    I see wood grain lines in that, looks like it was not parged, just left exposed after the forms were removed.

    In which case that looks like spalling from the steel possibly being too close to the exposed edge and rusting.

    Spalling is not good.

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  4. #4
    Join Date
    Aug 2007
    Location
    Memphis TN.
    Posts
    4,311

    Default Re: What caused this

    Frank,

    You got any more pics. ? Maybe with rust stains ?

    Deem be the straightest most uniform wood grains I've ever seen .

    It Might have Choked Artie But it ain't gone'a choke Stymie! Our Gang " The Pooch " (1932)
    Billy J. Stephens HI Service Memphis TN.

  5. #5
    Join Date
    Mar 2007
    Location
    Oklahoma City
    Posts
    357

    Default Re: What caused this

    There were no rust stains or visible rods. To the left of this area the wood grain was very evident and no cracks. I am leaning towards spalling. I did not take other pics. It was like this in an area on the opposite side of the house to. I thought it looked like spalling and advised them verbally that it likely needs parging before it gets worse, but I am now writing the report and wanted to get some opinions to help me out. Thanks

    If it weren't for lawyers, we would never need them.

  6. #6
    Richard Stanley's Avatar
    Richard Stanley Guest

    Default Re: What caused this

    Spalling. I see it alot on old slabs.


  7. #7
    Join Date
    Mar 2007
    Location
    Cape Cod, Massachusetts
    Posts
    614

    Default Re: What caused this

    I believe it is a poor mix of concrete. Too much water, water added to the mix at a later time or not enough cement in the mix, Concrete will fail in this manner.


  8. #8
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,042

    Default Re: What caused this

    Quote Originally Posted by Frank Bombardiere View Post
    I thought it looked like spalling and advised them verbally that it likely needs parging before it gets worse, but I am now writing the report and wanted to get some opinions to help me out. Thanks

    It's too late for pare coating.

    That crack means the concrete on one side of the crack (the side toward you) is loose from the side toward the rest of the slab.

    The only repair is to chip out all of the loose and spalled concrete and repair it with new concrete. They typical way I've see it done is they pneumatically place (shoot) gunite to build it back up. Kinda like shooting a gunite pool (see photo on: REED Gunite Machines. ) .

    Also: http://www.sika.gr/PDF/Concrete%20Repair.pdf

    The "cause" is that the steel in the footing rusted, pushing the concrete away from the rest of the footing (thickened slab edge). That slab as been structurally affected and degraded.

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •