Results 1 to 11 of 11
  1. #1
    Eric Smith's Avatar
    Eric Smith Guest

    Default Help with Manufacture Date, please

    Hello Gentlemen,

    Would anyone happen to have a resource to find the manufactur date of this Heat Pump. It is by Nordyne/Gibson and the model# is JT3BA-024KA.

    Greatly appreciated.

    Similar Threads:
    Inspection Referral

  2. #2
    Brian E Kelly's Avatar
    Brian E Kelly Guest

    Default Re: Help with Manufacture Date, please

    Need the serial # for that info.


  3. #3
    Eric Smith's Avatar
    Eric Smith Guest

    Default Re: Help with Manufacture Date, please

    That would be the # that I didnt write down. The house is close to my sisters, maybe I can stop back by. Plus, that will really impress the client.

    Anyone know where I can get an inexpensive Prestons Guide CD?

    Thanks.


  4. #4
    Join Date
    Mar 2007
    Location
    Spring Hill (Nashville), TN
    Posts
    5,851

    Default Re: Help with Manufacture Date, please

    Hi Eric,

    Just curious as to why you want to know the date of mfg. Was the unit not cooling properly or are you trying to tell your client it's age.

    None of the standards that most inspectors work under require you to tell the age of the unit. I stopped list the age many years back.

    Scott Patterson, ACI
    Spring Hill, TN
    www.traceinspections.com

  5. #5
    Eric Smith's Avatar
    Eric Smith Guest

    Default Re: Help with Manufacture Date, please

    I've always listed the age as a reference point for the client, when I could identify the age. Because I have a blurp embedded in my report that says "The statistical life expectancy of A/C units is 8-12 years". I always explain that I have seen some working just fine after 20 years and some that dont work so well after 3 years. It's a young couple, first home and they are nervous about everything.

    Trying to go that extra mile, plus I have to admit that I really want their realtor on my team. She seems like a top-seller.


  6. #6
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,042

    Default Re: Help with Manufacture Date, please

    Eric,

    I always took a photo of the nameplate with that information on it, and included the photo with the report.

    That way I did not have to write down the model number/serial number/etc., ... nor go back to look at it ...

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  7. #7
    Join Date
    Mar 2007
    Location
    Corpus Christi, TX
    Posts
    615

    Default Re: Help with Manufacture Date, please

    What Jerry P said.

    The only reason some people get lost in thought is because it's unfamiliar territory.
    - Paul Fix

  8. #8
    Tim Moreira's Avatar
    Tim Moreira Guest

    Default Re: Help with Manufacture Date, please

    Quote Originally Posted by Eric Smith View Post
    That would be the # that I didn't write down. The house is close to my sisters, maybe I can stop back by. Plus, that will really impress the client.

    Anyone know where I can get an inexpensive Preston's Guide CD?

    Thanks.
    NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO,.......GET THE POINT???

    DO NOT BUY PRESTON'S GUIDE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

    I HAVE HAD IT FOR THE LAST YEAR AND I HAVE YET TO FIND THE ANSWER TO ANYONE'S QUESTION IN THAT TIME ON THIS BOARD.

    I would strongly suggest looking into Carlson Dunlap's tech reference or what ever it is called. Preston's sucks in my opinion. Like I said, in the last year that I have owned it, I have yet to find the answer to any one's question with it????????????

    Waste of good money I say. But maybe I'm biased???


  9. #9
    Chris Ethridge's Avatar
    Chris Ethridge Guest

    Default Re: Help with Manufacture Date, please

    all i can say is that its a 2 ton, need s#


  10. #10
    Join Date
    Mar 2007
    Location
    Spring Hill (Nashville), TN
    Posts
    5,851

    Default Re: Help with Manufacture Date, please

    Yes, what Tim said! Buy the Carson Dunlap book over the Preston guide.

    Scott Patterson, ACI
    Spring Hill, TN
    www.traceinspections.com

  11. #11
    Eric Smith's Avatar
    Eric Smith Guest

    Thumbs down Re: Help with Manufacture Date, please

    Thanks fellas. It was a subtle message, but, I got the point, will not be buying Preston's guide.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •