Results 1 to 3 of 3
			
		- 
	08-19-2008, 05:54 PM #1 I had to laugh – at least to myself I had to laugh – at least to myselfI came across a nifty little waste line set-up for a washing machine yesterday. This has a trap with a sealed hose attachment at the end. There is a check valve just on the high side of the trap. I personally see this as a problem waiting to happen holding a lot of water above the check valve. And yes, I have seen setups like this on sump pumps. The plumber (or somebody) figured that the washing machine pump would be able to eject this wastewater up and out to the gravity fed house waste line above. A reputable builder in the area just recently finished this 48-year-old house restoration. Is there anybody out there that will tell me that I am wrong and that this is an acceptable way to plumb this waste line off the clothes washing machine? 
 Similar Threads:
 
- 
	08-19-2008, 06:54 PM #2 Re: I had to laugh – at least to myself Re: I had to laugh – at least to myself
 
- 
	08-19-2008, 08:27 PM #3 Re: I had to laugh – at least to myself Re: I had to laugh – at least to myselfJust a backflow preventer and you're in!!  
 
 


 
 
						
					
 
				
				
				
					 Reply With Quote
  Reply With Quote 
					
					 Originally Posted by Michael Koser
 Originally Posted by Michael Koser
					

Bookmarks