Results 1 to 10 of 10
  1. #1
    Stephen G Sheldon's Avatar
    Stephen G Sheldon Guest

    Default Protrusion from roof

    Does anyone know what that could be sticking out of the roof between the plumbing vent and the roof vent?

    Similar Threads:
    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    Crawl Space Creeper

  2. #2
    Join Date
    Feb 2008
    Location
    Caledon, Ontario
    Posts
    4,982

    Default Re: Protrusion from roof

    Central vac exhaust?


  3. #3

    Default Re: Protrusion from roof

    Looks like a roof anchor/ tie off point (called a "super anchor" in my area). If that is the case, it may be missing the plastic/ rubber cap that is needed to prevent leakage (I can't tell if I see metal or plastic at the top).........not that I've seen ones with a missing cap actually leak.

    When you were in the attic, you would have seen 2 metal brackets run through the sheathing. They should have been fastened to either side of the rafter/ truss chord. (if I am correct on what it is)


  4. #4
    Evan Grugett's Avatar
    Evan Grugett Guest

    Default Re: Protrusion from roof

    It appears to be a 3" or a 4" PVC pipe, too large for a central vac exhaust (usually 2"). In my area the central vac exhaust never comes through the roof. It exits near the bottom of the building. The house is too new for the pipe to be an overflow from an old gravity HW heating system tank in the attic. Check the attic for the bottom side of the penetration, that may shed some light on this.


  5. #5
    Join Date
    Feb 2008
    Location
    Caledon, Ontario
    Posts
    4,982

    Default Re: Protrusion from roof

    As suggested in another thread on the same topic, it could be some type of antennae. The picture is not revealing enough.


  6. #6
    Join Date
    Mar 2007
    Location
    Anacortes, Washington
    Posts
    415

    Default Re: Protrusion from roof

    It appears to be the Osha required tie-off. These tie-offs typically have a black plastic hood that goes over them. If you look in the attic you will see a U-bolt going over a rafter and an additional 2x4 sistered to the rafter. Is this is in a housing tract every home will have at least one.


    //Rick

    Rick Bunzel
    WWW.PacCrestInspections.com
    360-588-6956

  7. #7
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,042

    Default Re: Protrusion from roof

    Quote Originally Posted by Raymond Wand View Post
    As suggested in another thread on the same topic,

    It does make it confusing to have two threads on the same topic, by the same person, one day apart. Means having to look in both places for information.

    I'm going with the OSHA tie-offs.

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  8. #8
    Join Date
    Feb 2008
    Location
    Caledon, Ontario
    Posts
    4,982

    Default Re: Protrusion from roof

    Never seen a tie-off which is standing. Up here the tie-off is a nylon strap wrapped around rafter and exterior portion just has an O-ring tie off on the nylon strap. Must be a regional difference.


  9. #9
    Join Date
    Mar 2007
    Location
    Fuquay Varina, NC
    Posts
    1,074

    Default Re: Protrusion from roof

    They are flat stainless steel with an eyelet. They are 2 piece sandwich together and tack welded along the edge. The plastic cap is to keep it from leaking along the seam. There is a rubber boot and the plastic cap is zip stripped to the rubber boot.
    Super Anchor Fall Protection Page 1

    Mike Schulz License 393
    Affordable Home Inspections
    www.houseinspections.com

  10. #10
    Brent Simmerman's Avatar
    Brent Simmerman Guest

    Default Re: Protrusion from roof

    Some newer homes around here have PSD (passive soil depressurization) system for Radon. That will be a 3 or 4 inch PVC pipe protruding from the roof.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •