Results 1 to 19 of 19
  1. #1
    Join Date
    Mar 2007
    Location
    Knoxville, TN
    Posts
    2,560

    Default what was this guy thinking?

    Just have to wonder what someone was thinking when they wired this. By the way, I pulled the cover and outlet because I didn't trust the "grounded" reading I was getting.

    Similar Threads:
    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    Inspection Referral

  2. #2
    Join Date
    Feb 2008
    Location
    Chicago IL
    Posts
    2,048

    Default Re: what was this guy thinking?

    What's the difference, they are all copper wires.

    www.aic-chicago.com
    773/844-4AIC
    "The Code is not a ceiling to reach but a floor to work up from"

  3. #3
    Join Date
    Mar 2007
    Location
    Georgetown, KY
    Posts
    538

    Default Re: what was this guy thinking?

    "Yup, that looks right to me. Shove it in and let's plug something into it!"

    Gotta admit, I didn't see what you were talking about on the first look. Second look showed it right up.

    Erby Crofutt, Georgetown, KY - Read my Blog here: Erby the Central Kentucky Home Inspector B4 U Close Home Inspections www.b4uclose.com www.kentuckyradon.com
    Find on Facebook at: https://www.facebook.com/B4UCloseInspections

  4. #4
    Ted Menelly's Avatar
    Ted Menelly Guest

    Default Re: what was this guy thinking?

    Quote Originally Posted by Jack Feldmann View Post
    Just have to wonder what someone was thinking when they wired this. By the way, I pulled the cover and outlet because I didn't trust the "grounded" reading I was getting.
    What kind of tester and what did it read. They both go to the same bar in general in a main panel/service equipment with the ground and neutral strapped together.


  5. #5
    Join Date
    Aug 2008
    Location
    Maryland
    Posts
    1,970

    Default Re: what was this guy thinking?

    Ted,

    It seems like most receptacles have the grounded and grounding conductor terminations on the same side. I can't be sure from this photo, but, it looks like the black conductor is on the light colored screws. That would mean the bare grounding conductor is being used as a hot.


  6. #6
    Join Date
    Mar 2007
    Location
    Knoxville, TN
    Posts
    2,560

    Default Re: what was this guy thinking?

    Suretest showed it grounded.

    Yep, black wire was on silver screw, bare copper on dark screw, and white wire on ground screw.

    And yes, they are all copper - and here, I thought it was wrong.


  7. #7
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,042

    Default Re: what was this guy thinking?

    Quote Originally Posted by Jack Feldmann View Post
    Suretest showed it grounded.

    Yep, black wire was on silver screw, bare copper on dark screw, and white wire on ground screw.

    Jack,

    Did the SureTest show that as reverse polarity?

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  8. #8
    Join Date
    Feb 2009
    Location
    Southern Vancouver Island
    Posts
    4,607

    Default Re: what was this guy thinking?

    Quote Originally Posted by Jim Port View Post
    Ted,

    It seems like most receptacles have the grounded and grounding conductor terminations on the same side. I can't be sure from this photo, but, it looks like the black conductor is on the light colored screws. That would mean the bare grounding conductor is being used as a hot.
    It's the other way round, I believe. The black is hot regardless, assuming the wiring from the panel is correct. Ground becomes energized when you plug in a load. Scary.
    Couldn't get it any more wrong then that.


  9. #9
    Dennis Kloth's Avatar
    Dennis Kloth Guest

    Default Re: what was this guy thinking?

    He could have got it more wrong. He could have grounded the hot.


  10. #10
    Michael Larson's Avatar
    Michael Larson Guest

    Default Re: what was this guy thinking?

    Quote Originally Posted by Jim Port View Post
    Ted,

    It seems like most receptacles have the grounded and grounding conductor terminations on the same side. I can't be sure from this photo, but, it looks like the black conductor is on the light colored screws. That would mean the bare grounding conductor is being used as a hot.
    The black is on the left facing the outlet so yes it is reverse polarity.


  11. #11
    Join Date
    Apr 2007
    Location
    state of jefferson
    Posts
    522

    Default Re: what was this guy thinking?

    Quote Originally Posted by Michael Larson View Post
    The black is on the left facing the outlet so yes it is reverse polarity.
    michael,
    would that be with the ground facing up or down? from looking at it from inside the room?


  12. #12
    Ted Menelly's Avatar
    Ted Menelly Guest

    Default Re: what was this guy thinking?

    Quote Originally Posted by Jim Port View Post
    Ted,

    It seems like most receptacles have the grounded and grounding conductor terminations on the same side. I can't be sure from this photo, but, it looks like the black conductor is on the light colored screws. That would mean the bare grounding conductor is being used as a hot.

    Yes the wiring being just screwed up through me off and was not thinking of that silver screw.

    If the receptacle wiring goes all the way back to the panel and the ground having no insulation a liitle heat and a good fire could take place. As far as what Micheal said the black does go to ground with that ground wire hooked up on the other side of the receptacle sending juice through that ground wire to the receptacle it came from.

    I guess they figured since the ground wire had no insulation on it then it matched more closely the color of the brass screw


  13. #13
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,042

    Default Re: what was this guy thinking?

    Quote Originally Posted by Michael Larson View Post
    The black is on the left facing the outlet so yes it is reverse polarity.
    Maybe not.

    It is possible that the other end of that cable is ... did I just say "it is possible that"??? ... er ... in all likelihood ... the other end of that cable is also all screwed up, so it MAY BE that the bare ground is indeed "hot".

    Which is why I asked Jack if he got a reverse polarity reading on his SureTest.

    It is entirely possible ... even likely?? ... that is screwed up about as much as one can screw up a circuit.

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  14. #14
    Join Date
    Apr 2007
    Location
    state of jefferson
    Posts
    522

    Default Re: what was this guy thinking?

    polarity scmolarity, my copy of "wiring for bubbas" says if you plug something in and it works=you dun good!


  15. #15
    Michael Greenwalt's Avatar
    Michael Greenwalt Guest

    Default Re: what was this guy thinking?

    Just to play devils advocate here, no disrespect intended but.....

    Why did you "not trust" the reading you were getting? Just a hunch or was it something else you discovered in the inspection.

    and

    why did you pull the cover on the receptacle? And as a general concensus, how many of you inspectors pull cover plates? On occasion, when you feel the need for "further investigation", at every inspection?

    Inquiring minds want to know, is there something to be learned here?


  16. #16
    Ted Menelly's Avatar
    Ted Menelly Guest

    Default Re: what was this guy thinking?

    Quote Originally Posted by Michael Greenwalt View Post
    Just to play devils advocate here, no disrespect intended but.....

    Why did you "not trust" the reading you were getting? Just a hunch or was it something else you discovered in the inspection.

    and

    why did you pull the cover on the receptacle? And as a general concensus, how many of you inspectors pull cover plates? On occasion, when you feel the need for "further investigation", at every inspection?

    Inquiring minds want to know, is there something to be learned here?
    General rule I keep. If it tests wrong, write it up. If need be due to older wiring or aluminum wiring pull a number of covers off and cive a quick preview of a representive numer of receptacles.

    I think Jack was just making the home buyer proud by finding the concern and then pulling it apart to show him what was going on. He got an atta boy for that one


  17. #17
    Jim Zborowski's Avatar
    Jim Zborowski Guest

    Default Re: what was this guy thinking?

    According to Tim ( Home Improvement ) " lets see............dirt is black so black is ground, wiye is like the sun..hot........."


  18. #18
    Join Date
    Mar 2007
    Location
    Knoxville, TN
    Posts
    2,560

    Default Re: what was this guy thinking?

    OK - Suretest showed properly grounded outlet.

    I do pull off covers many times, and pull the outlets out sometimes too. I do it when i go to a house that has 2 prong outlets, and some 3 prong, and after checking a bunch of ungrounded 3 prongs, I find one that is grounded.
    I have found countless bootleg grounds this way.

    I was by myself, so this was not done to impress anyone. It's just the way I do things.

    When I am in an old house and find a grounded 3 prong outlet, I will pull the cover off and look for a bare copper on the ground screw. If I can't see one, or it looks like a bootleg ground, or something else, I pull out the outlet.


  19. #19
    Ted Menelly's Avatar
    Ted Menelly Guest

    Default Re: what was this guy thinking?

    Quote Originally Posted by Jack Feldmann View Post
    OK - Suretest showed properly grounded outlet.

    I do pull off covers many times, and pull the outlets out sometimes too. I do it when i go to a house that has 2 prong outlets, and some 3 prong, and after checking a bunch of ungrounded 3 prongs, I find one that is grounded.
    I have found countless bootleg grounds this way.

    I was by myself, so this was not done to impress anyone. It's just the way I do things.

    When I am in an old house and find a grounded 3 prong outlet, I will pull the cover off and look for a bare copper on the ground screw. If I can't see one, or it looks like a bootleg ground, or something else, I pull out the outlet.

    "I was by myself, so this was not done to impress anyone. It's just the way I do things."

    I was kidding Jack. But it did sound like it made good copy





Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •