Results 1 to 8 of 8

Thread: Window question

  1. #1
    dan orourke's Avatar
    dan orourke Guest

    Default Window question

    Last edited by dan orourke; 01-01-2008 at 03:56 PM.
    Member Benefits1

  2. #2
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,042

    Default Re: Window question

    Dan,

    No photo.

    If I am imagining them correctly, they are for drainage. DO NOT seal them.

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  3. #3
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,042

    Default Re: Window question

    Those ARE NOT as I imagined them.

    Those (to the best I can tell) should be sealed - they are within the weather-resisting area of the window. Any water which gets in there will leak down.

    Now, *IF* (a big IF) those leak down to a channel which drains out, then you would also see the holes I was imagining - drain holes on/to the exterior.

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  4. #4
    Join Date
    Mar 2007
    Location
    New Mexico
    Posts
    1,352

    Default Re: Window question

    Weep holes. They should correspond to another set of holes on the lower outside part of the window frame. Don't seal them.

    Jim Robinson
    New Mexico, USA

  5. #5
    Join Date
    Mar 2007
    Location
    Spring Hill (Nashville), TN
    Posts
    5,851

    Default Re: Window question

    Yes, those are weep holes. That window has an interior pan that directs the water to a set of exterior drain holes. Hopefully the exterior drain holes have not been clogged up with stucco, etc.

    Scott Patterson, ACI
    Spring Hill, TN
    www.traceinspections.com

  6. #6
    David Banks's Avatar
    David Banks Guest

    Default Re: Window question

    If those are weep holes as Jim and Scott say(No reason to doubt) you would think they would function better if they were down lower to the frame where the water would collect.


  7. #7
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,042

    Default Re: Window question

    I've never seen windows designed to get water 'inside' like that and then drain it back out, except for sliders (which, of course, do this).

    Learned something new too.

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  8. #8
    Join Date
    Mar 2007
    Location
    Garland, TX
    Posts
    652

    Default Re: Window question

    The better end windows put their name on the lock mechanism. It is then very easy to go to their site and view tech data and schematics.

    A number of vinyl units have this type of drainage or removable sill track with weeps that can be cleaned out as necessary.

    badair http://www.adairinspection.com Garland, TX 75042
    Commercial-Residential-Construction-EIFS-Stucco-ACMV-Infrared Thermography
    life is the random lottery of events followed by numerous narrow escapes...accept the good

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •