Results 1 to 12 of 12
  1. #1
    Join Date
    Mar 2007
    Location
    Philadelphia PA
    Posts
    3,177

    Default wire big enough?

    Take your best guess - 15 amp breaker with #4 copper.

    Similar Threads:
    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    Crawl Space Creeper
    "There is no exception to the rule that every rule has an exception." -James Thurber, writer and cartoonist (1894-1961)
    www.ArnoldHomeInspections.com

  2. #2
    Richard Rushing's Avatar
    Richard Rushing Guest

    Default Re: wire big enough?

    Best guess... o.k. (this is a W.A.G)

    The stove was previously an electric unit but was changed out to a gas unit.

    What'd I win???

    Rich


  3. #3
    Join Date
    Mar 2007
    Location
    Philadelphia PA
    Posts
    3,177

    Default Re: wire big enough?

    Close, but no cigar, which is too much of a hint, I guess (not the cigar).

    "There is no exception to the rule that every rule has an exception." -James Thurber, writer and cartoonist (1894-1961)
    www.ArnoldHomeInspections.com

  4. #4
    Richard Rushing's Avatar
    Richard Rushing Guest

    Default Re: wire big enough?

    Quote Originally Posted by John Arnold View Post
    Close, but no cigar, which is too much of a hint, I guess (not the cigar).

    o.k.-- now I got it...

    The wife's plug-in "toy" was previously so big it required a 220 receptacle. They went to a battery 'toy' and now they can power another refrigerator...

    What'd I win??

    Rich


  5. #5
    Join Date
    Mar 2007
    Location
    Connecticut
    Posts
    1,828

    Default Re: wire big enough?

    Thanks Rich, as usual, got me laughing after a long day.


  6. #6
    Join Date
    Mar 2007
    Location
    Corpus Christi, TX
    Posts
    615

    Default Re: wire big enough?

    Okay. Used to have an electric range and oven. Converted to gas. One leg of the 220V is folded up out of the way, but still in the panel. The other end of the #4 is pigtailed to a piece of #14. A new 110V receptacle is laying on the floor behind the gas range where an extension cord runs up to the new light over the gas range. A clip on switch is snapped into the extension cord.

    What did Rich win?

    The only reason some people get lost in thought is because it's unfamiliar territory.
    - Paul Fix

  7. #7
    James Duffin's Avatar
    James Duffin Guest

    Default Re: wire big enough?

    A heat pump was replaced with a gas furnace...


  8. #8
    Join Date
    Mar 2007
    Location
    Philadelphia PA
    Posts
    3,177

    Default Re: wire big enough?

    bingo

    "There is no exception to the rule that every rule has an exception." -James Thurber, writer and cartoonist (1894-1961)
    www.ArnoldHomeInspections.com

  9. #9
    Erik Elwood's Avatar
    Erik Elwood Guest

    Default Re: wire big enough?

    Was the breaker rated for a wire that big?

    looks like it is only rated for 14-10 AWG


  10. #10
    Join Date
    Mar 2007
    Location
    Philadelphia PA
    Posts
    3,177

    Default Re: wire big enough?

    Quote Originally Posted by Erik Elwood View Post
    Was the breaker rated for a wire that big?

    looks like it is only rated for 14-10 AWG
    no way, mon. least ways, that what I reported.

    "There is no exception to the rule that every rule has an exception." -James Thurber, writer and cartoonist (1894-1961)
    www.ArnoldHomeInspections.com

  11. #11
    Join Date
    Mar 2007
    Location
    Corpus Christi, TX
    Posts
    615

    Default Re: wire big enough?

    Sorry, Rich. I tried to win you something. I be John and James are cousins or something.

    The only reason some people get lost in thought is because it's unfamiliar territory.
    - Paul Fix

  12. #12
    James Duffin's Avatar
    James Duffin Guest

    Default Re: wire big enough?

    I saw something similar a few months ago. They was a 150 breaker in the service panel that used to feed a 240 volt electric furnace in the crawlspace. They had taken one wire off of the 150 breaker and made it a neutral so they could have 110 volts for the newly installed gas furnace. They installed a 20 amp single pole breaker for the gas furnace in the old electric furnace panel. I wrote up what I saw but it looked ok to me.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •