I need a detail.

[Herb Scott]

Gentlemen,
I need a detail. I would show a photo but don’t know how to transfer it from my photo program to this post.
I need a section detail of an exterior wall with a solid stone veneer about 4 ft. high with a slate cap and cement board siding above it. (it could be any type of siding above) It’s a wood framed wall. I can see tyvex where the siding abuts the slate cap and many of the slate are either level or have negative slope towards the house. How is this supposed to be flashed to prevent water penetration into the wall structure at this joint? Or do we depend on caulk, the tyvex, and hope it drains out at the bottom. I know what the problems are but I need a detail to show how it should be built.
Thanks, Herb Scott

Similar Threads:

• metal roof detail request
• Is there is specific name for this architectural detail?
• shake roof valley detail
• Strange Driveway Detail

[Ron Bibler]

Try this site its just one of many that can be found on the net.

ftp://imgs.ebuild.com/woc/m970675.pdf

Best

Ron

[Jim Luttrall]

Technical Notes

You might find something here or at the rest of the info at BIA site.

[A.D. Miller]

Herb:

This may be of help.

[Herb Scott]

Thanks, Guys
Kudos to Brian for a great forum.
I put a request help in the evening and have several details to put in my report when I wake up.
Thanks, again.
Herb

[Stephen Meyer]

AD, Where did you get that detail. Very good.....

sm

[A.D. Miller]

AD, Where did you get that detail. Very good.....

sm

Stephen: I really don't remember. I've been collecting them for 13 years now and have lost count of the number or origin of most.

Sorry.