Almost didnt get in this panel to see this...

[Marc M]

I just about gave up, then this...

Similar Threads:

• Diagran for 4 wire 240 V circuit at load-side panel ("sub panel").
• Remote panel board feed from main panel buss bar
• Defects at service panel & distribution panel?
• Electical Panel/Sub Panel Question
• Feed From Main Panel to Sub Panel

[J Moore]

Oh My Goodness,

Guess they got tired of the fuses blowing.
at least they used electrical tape

[J Moore]

John,
I was referring to the wire pieces jumping between poles of the fuse and not the tape alone. The tape seems to be holding the wire jumper to the fuse.

[Jim Zborowski]

maybe they figure if it overloads it willl arc at the ends of the jumper wire, thereby blowing it away and eliminating the connection...................................or, they're just not real bright

[Bill Kriegh]

Look at the bright side. The wire will burn in two before the pieces of copper pipe I usually see used in place of the fuses.

[Marc M]

I forgot to mention that this was an electricians house.

[Jerry Peck]

I forgot to mention that this was an electricians house.

I thought John lived in Las Vegas?

[Darin Redding]

Looks ok to me. At least they used stranded wire

[Damon McCarty]

As the old saying goes:
An eletricians house pops fuses
A plumbers house has leaking pipes
An asbestos workers house is all dusty ....

[Darin Redding]

Well as HI's, then, what does that say about our HOUSES?

I probably should move...

[Bob White]

Well as HI's, then, what does that say about our HOUSES?

I probably should move...

Truth.

If I need a photo of a common problem and don't want to search my photo archives, I can usually shoot a pic of my house....

[Jerry Peck]

Well as HI's, then, what does that say about our HOUSES?

I probably should move...

Truth.

If I need a photo of a common problem and don't want to search my photo archives, I can usually shoot a pic of my house....

There it is, HIs homes are R&D centers!