Results 1 to 10 of 10

Thread: Chimney Hijinks

  1. #1
    Join Date
    Mar 2007
    Location
    Spring City/Surrounding Philadelphia area
    Posts
    3,509

    Default Chimney Hijinks

    Hmmmmm. This chimney looks.........interesting.

    Similar Threads:
    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    Member Benefits1

  2. #2
    Join Date
    Mar 2007
    Location
    Spring City/Surrounding Philadelphia area
    Posts
    3,509

    Default Re: Chimney Hijinks

    Mmmmmmmmm........

    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images

  3. #3
    Join Date
    Mar 2007
    Location
    Spring City/Surrounding Philadelphia area
    Posts
    3,509

    Default Re: Chimney Hijinks

    What the...........

    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images

  4. #4
    Join Date
    Mar 2007
    Location
    Spring City/Surrounding Philadelphia area
    Posts
    3,509

    Default Re: Chimney Hijinks

    Wow!!!!!!!!!!

    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images

  5. #5
    Chuck J. Jones's Avatar
    Chuck J. Jones Guest

    Wink Re: Chimney Hijinks

    Saving a few dollars on that chimney cap sure makes sense now!


  6. #6
    Join Date
    Mar 2007
    Location
    Healdsburg, CA
    Posts
    1,741

    Default Re: Chimney Hijinks

    Me thinks in attempting to comply with the 10-3 foot rule (bldg-code) after erecting the second story addition they oversized the furnace vent flue resulting in major a condensation problem?

    Jerry McCarthy
    Building Code/ Construction Consultant

  7. #7
    Join Date
    Mar 2007
    Location
    Spring City/Surrounding Philadelphia area
    Posts
    3,509

    Default Re: Chimney Hijinks

    That was my same line of thinking Jerry. I only ran the furnace during the inspection for about 5 minutes and that alone was enough to make the flue pipe in the basement leak condensate. The flue pipe above the furnace was new and shiny too. What a coincidence.

    Despite all of this, the service tag on the furnace mentioned nothing of the corrosion issues or the exterior chimney configuration. It's a great way to ruin a furnace.


  8. #8
    Join Date
    Mar 2007
    Location
    Near Philly, Pa.
    Posts
    1,682

    Default Re: Chimney Hijinks

    Nick, what is the flue material in that extension? Metal? I can't wait to see what the base of the chimney looks like.

    There are a lot of factors that collectively can be causing all this condensation so don't get tunnel vision on just the improper chimney.

    You can get a lot of condensation early in the firing cycle. For instance, with our weather in Philly around 75*F and ~50%Rh, you already have a lot of moisture condensing in a cool flue that is rarely if ever firing now. If the burner fires on a short cycle, the flue walls may not have warmed up above dewpoint (usually around 167*F for #2 high sulfur oil) before it cycles off. Then a chimney exposed in the breeze such as this will cool quickly condensing. This is a classic case for needing an insulated liner even if the chimney was brand new, built perfectly to the code. Of couse, using the case in point, the chimney proper would first have to be extended per code then a listed liner installed. Rather than extending a cold uninsulated 18" block chimney, they may be better off to raze this chimney and replace it with a listed factory chimney, which could be braced against the upper roof deck for proper height.

    Then, too, they should have combustion analysis performed and this appliance tweaked to maximize performance. If you are seeing this kind of condensation, you have to worry about CO spillage as well. If this rotted out new chimney connector pipe, a blocked flue is a very real possibility.

    Nick, let me know if I can help. ;-)
    Bob

    Keep the fire in the fireplace.

  9. #9
    Join Date
    Mar 2007
    Location
    Plano, Texas
    Posts
    4,245

    Default Re: Chimney Hijinks

    Just had a family die here of CO in an "extended stay" hotel (read cheap flop house.) Don't hesitate to call out this stuff when it is crap. Someones life may depend on our opinion!

    Jim Luttrall
    www.MrInspector.net
    Plano, Texas

  10. #10
    Join Date
    Mar 2007
    Location
    Spring City/Surrounding Philadelphia area
    Posts
    3,509

    Default Re: Chimney Hijinks

    Bob, the extension was a thin metal material. I told them the entire setup (furnace and chimney) is in need of immediate repairs. The house was up in Bensalem which may be out of your neck of the woods.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •