Results 1 to 3 of 3
  1. #1
    mathew stouffer's Avatar
    mathew stouffer Guest

    Default Distribution panel

    This may have been discussed before but i was unable to located the tread. Is the amount of Romex cable entering the penetration acceptable.

    Similar Threads:
    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    Crawl Space Creeper

  2. #2
    mike huntzinger's Avatar
    mike huntzinger Guest

    Default Re: Distribution panel

    i would not write it up but if all the wires were sheathed then say somethig


  3. #3
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,032

    Default Re: Distribution panel

    The extra sheath sticking into the panel is not a big deal, however, your photos show larger problems, such as too many NM cable in a conduit or fitting and not a proper fitting (lower right of panel) and improper fitting with no clamp (lower left of panel).

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •