Results 1 to 6 of 6
  1. #1
    Kevin Luce's Avatar
    Kevin Luce Guest

    Default Is the copper elbow an approved fitting?

    Came across a house that used PEX. I noticed that brass elbow connectors were used everywhere but at three locations. At these three locations they used connections that are copper elbows. Are these approved by the manufacturer? I looked up PEX connectors and couldn't find any copper elbows sold for this material.

    Similar Threads:
    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    Member Benefits1

  2. #2
    A.D. Miller's Avatar
    A.D. Miller Guest

    Default Re: Is the copper elbow an approved fitting?

    Quote Originally Posted by Kevin Luce View Post
    Came across a house that used PEX. I noticed that brass elbow connectors were used everywhere but at three locations. At these three locations they used connections that are copper elbows. Are these approved by the manufacturer? I looked up PEX connectors and couldn't find any copper elbows sold for this material.
    KL: Not if it is Zurn PEX. They allow only brass or polymer fittings. The following apply, but I don't have copies of them:

    ASTM F 1807
    ASTM F 1960
    ASTM F 1807

    Maybe JP, or one of the ubiquitous wrench slingers on this forum can help further.


  3. #3
    Join Date
    Mar 2008
    Location
    Charlotte NC
    Posts
    2,304

    Default Re: Is the copper elbow an approved fitting?

    Not if it is Zurn PEX. They allow only brass or polymer fittings.
    Aaron that is probably where they went wrong!


  4. #4
    A.D. Miller's Avatar
    A.D. Miller Guest

    Default Re: Is the copper elbow an approved fitting?

    Quote Originally Posted by Vern Heiler View Post
    Aaron that is probably where they went wrong!
    VH: I think it was the wrong turn they took in China . . .


  5. #5
    Michael Larson's Avatar
    Michael Larson Guest

    Default Re: Is the copper elbow an approved fitting?

    Quote Originally Posted by Kevin Luce View Post
    I looked up PEX connectors and couldn't find any copper elbows sold for this material.
    http://www.gofine.com.cn/agents/nibco/pdf/Pex1098.pdf


  6. #6
    A.D. Miller's Avatar
    A.D. Miller Guest

    Default Re: Is the copper elbow an approved fitting?

    Quote Originally Posted by Michael Larson View Post
    ML: Yep. Just not with Zurn PEX.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •