Results 1 to 2 of 2
  1. #1
    Greg Frazier's Avatar
    Greg Frazier Guest

    Default Foamed insulation at furnace

    Found this today. It appears to be expanding foam used to seal the chimney. It was painted to match the wall. I called it out as improper material. Does anyone know if any of this stuff is high temperature suitable? I know the orange stuff can be used in garages to seal firewalls, but this was yellow foam. Also noted that the water heater is not venting above the furnace vent.

    Similar Threads:
    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    Crawl Space Creeper

  2. #2
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,032

    Default Re: Foamed insulation at furnace

    If that is Type B gas vent, which it should be, the insulation needs to be kept back 1" minimum ... regardless of any temperature rating of the foam insulation.

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •