Results 1 to 5 of 5
-
08-15-2009, 02:54 PM #1
Member
- Join Date
- Mar 2007
- Location
- Chicago, IL
- Posts
- 2,797
Correct junction between masonry chimney and BUR
Does anyone have a diagram of the correct method of making this transition?
Thanks.
Similar Threads:
-
08-16-2009, 02:34 PM #2
Member
- Join Date
- Mar 2007
- Location
- Garland, TX
- Posts
- 652
Re: Correct junction between masonry chimney and BUR
I use the one at bottom of page
Copper.org: Architecture Design Handbook: Architectural Details: Flashings and Copings - Stepped and Chimney Flashings
may already be under all that deteriorated material
Last edited by BARRY ADAIR; 08-16-2009 at 02:41 PM.
badair http://www.adairinspection.com Garland, TX 75042
Commercial-Residential-Construction-EIFS-Stucco-ACMV-Infrared Thermography
life is the random lottery of events followed by numerous narrow escapes...accept the good
-
08-16-2009, 07:35 PM #3
Member
- Join Date
- Mar 2007
- Location
- Chicago, IL
- Posts
- 2,797
Re: Correct junction between masonry chimney and BUR
Thanks
-
08-16-2009, 08:02 PM #4
Member
- Join Date
- Feb 2009
- Location
- Southern Vancouver Island
- Posts
- 4,607
Re: Correct junction between masonry chimney and BUR
I think Barry has a good eye and he can see a chimney flashing under all that tar.
That roof/wall flashing on the lower left of pic1 is a piece of work too.
-
08-17-2009, 11:08 AM #5
Joao Vieira Guest Re: Correct junction between masonry chimney and BUR
the flashing membrane in the vertical plane should be terminated per BARRY ADAIR link or have a least a termination bar fastened properly to the brick where the flashing is installed.
Reply With Quote
Bookmarks