Results 1 to 18 of 18
  1. #1
    Join Date
    Mar 2007
    Location
    Philadelphia PA
    Posts
    3,177

    Default screen on furnace intake

    20 year old Trane condensing furnace.
    I'm suspicious of the screen on the intake.

    Similar Threads:
    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    Member Benefits1
    "There is no exception to the rule that every rule has an exception." -James Thurber, writer and cartoonist (1894-1961)
    www.ArnoldHomeInspections.com

  2. #2
    A.D. Miller's Avatar
    A.D. Miller Guest

    Default Re: screen on furnace intake

    Quote Originally Posted by John Arnold View Post
    20 year old Trane condensing furnace.
    I'm suspicious of the screen on the intake.
    JA: It all depends on the net-free area required by Trane.


  3. #3
    Join Date
    Mar 2007
    Location
    Bradley Illinois
    Posts
    30

    Cool Re: screen on furnace intake

    Thats to keep the kids from dropping things into the burner chamber!


  4. #4
    Join Date
    Mar 2007
    Location
    Kalamazoo, MI
    Posts
    117

    Default Re: screen on furnace intake

    Recommend screen removal followed by extending intake to outside air source.

    RJDalga
    http://homeanalysts.com
    Kalamazoo, MI

  5. #5
    Join Date
    Feb 2008
    Location
    Oak Park, IL
    Posts
    61

    Default Re: screen on furnace intake

    I have seen this on older furnaces too. I recommend extending the intake to the outside also. I think these were early versions of the high efficiency furnaces.

    Rick Sabatino
    Sabatino Consulting, Inc.
    Oak Park, IL

  6. #6
    Join Date
    Mar 2007
    Location
    Spring Hill (Nashville), TN
    Posts
    5,851

    Default Re: screen on furnace intake

    The manufacturer will have specific requirements when it comes to the intake and the exhaust flue. If the room has plenty of make-up air for the amount of BTU's then the current intake is just fine.

    You really should check the BTU's vs. the room size and then what the manufacturer requires before you start making recommendations.

    Scott Patterson, ACI
    Spring Hill, TN
    www.traceinspections.com

  7. #7
    Join Date
    Feb 2009
    Location
    St. Louis, Mo. area.
    Posts
    280

    Default Re: screen on furnace intake

    Quote Originally Posted by Scott Patterson View Post
    The manufacturer will have specific requirements when it comes to the intake and the exhaust flue. If the room has plenty of make-up air for the amount of BTU's then the current intake is just fine.

    You really should check the BTU's vs. the room size and then what the manufacturer requires before you start making recommendations.

    I certainly agree with checking the OEM's requirement's prior to making any recommendations about changing the intake air routing. But putting that aside, regardless of available inside make-up air, wouldn't the furnace be more efficient (and maybe even achieve its efficiency rating for the first time since installation) by using outside air instead of inside air for combustion?


  8. #8
    Join Date
    Mar 2007
    Location
    Fuquay Varina, NC
    Posts
    1,074

    Default Re: screen on furnace intake

    regardless of available inside make-up air, wouldn't the furnace be more efficient (and maybe even achieve its efficiency rating for the first time since installation) by using outside air instead of inside air for combustion?
    Where is the unit located? In an attic? Same air! What difference would it make if it was outside or indoor air as long as it had the volume required.

    Mike Schulz License 393
    Affordable Home Inspections
    www.houseinspections.com

  9. #9
    Join Date
    Mar 2007
    Location
    Philadelphia PA
    Posts
    3,177

    Default Re: screen on furnace intake

    Quote Originally Posted by Mike Schulz View Post
    Where is the unit located?...
    Unfinished basement.

    "There is no exception to the rule that every rule has an exception." -James Thurber, writer and cartoonist (1894-1961)
    www.ArnoldHomeInspections.com

  10. #10
    Join Date
    Mar 2007
    Location
    Near Philly, Pa.
    Posts
    1,682

    Cool Re: screen on furnace intake

    In confined spaces, this arrangement can depressurize the CAZ and cause backdrafting and poor combustion in water heaters in the same space.
    bob

    Keep the fire in the fireplace.

  11. #11
    Join Date
    Mar 2007
    Location
    Kalamazoo, MI
    Posts
    117

    Default Re: screen on furnace intake

    Look...the bottom line here is that the HVAC guy was too cheap to extend the 2nd pipe to the outside where it should be!

    RJDalga
    http://homeanalysts.com
    Kalamazoo, MI

  12. #12
    Join Date
    Mar 2007
    Location
    Fuquay Varina, NC
    Posts
    1,074

    Default Re: screen on furnace intake

    They install it just like that here in attics, crawl space and unfinished basements. If it was in a smaller room I can see what Bob has pointed out. But in big open space what's the problem.

    Look...the bottom line here is that the HVAC guy was too cheap to extend the 2nd pipe to the outside where it should be!
    Show us where the instructions says that for unfinished basements. If they plan on finishing the basement running a section of pvc is no big deal but to write up something for nothing is.

    Mike Schulz License 393
    Affordable Home Inspections
    www.houseinspections.com

  13. #13
    Join Date
    Feb 2009
    Location
    St. Louis, Mo. area.
    Posts
    280

    Default Re: screen on furnace intake

    Quote Originally Posted by Mike Schulz View Post
    Where is the unit located? In an attic? Same air! What difference would it make if it was outside or indoor air as long as it had the volume required.
    If it's indoor air that you're using for combustion, you're wasting money you've already spent to condition (put BTU's into) it, so that's a less efficient use of your money (and the furnace). If it's outside air that you're using for combustion, it's free, and therefore a more efficient use of your money (and the furnace).


  14. #14
    Join Date
    May 2007
    Location
    Frankfort, KY
    Posts
    326

    Default Re: screen on furnace intake

    Quote Originally Posted by Michael Chambers View Post
    Regardless of available inside make-up air, wouldn't the furnace be more efficient (and maybe even achieve its efficiency rating for the first time since installation) by using outside air instead of inside air for combustion?
    Cold air is harder on the combustion process than warm air is and less efficient.

    Many industrial facilities preheat their combustion air to make the appliances operate more efficiently.

    If you can use interior air safely it's the best bet.

    Measured Performance more than just a buzzword

  15. #15
    Join Date
    Mar 2007
    Location
    Kalamazoo, MI
    Posts
    117

    Default Re: screen on furnace intake

    Michael, I think you hit the nail on the head!
    David, How is cold air harder on equipment? This makes no sense to me. Cold air contains less moisture than warm air which is a byproduct of combustion anyway.

    RJDalga
    http://homeanalysts.com
    Kalamazoo, MI

  16. #16
    Join Date
    Mar 2007
    Location
    Fuquay Varina, NC
    Posts
    1,074

    Default Re: screen on furnace intake

    This might answer your cold and hot air. Hot & Cold Running Oxygen | Ask Metafilter

    Mike Schulz License 393
    Affordable Home Inspections
    www.houseinspections.com

  17. #17
    Join Date
    Mar 2007
    Location
    Chicago, IL
    Posts
    2,797

    Default Re: screen on furnace intake

    Also, some manufacturers recommend or require an elbow on that intake to prevent obstruction:

    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    Michael Thomas
    Paragon Property Services Inc., Chicago IL
    http://paragoninspects.com

  18. #18
    Join Date
    May 2007
    Location
    Frankfort, KY
    Posts
    326

    Default Re: screen on furnace intake

    Quote Originally Posted by Robert Dalga View Post
    How is cold air harder on equipment? This makes no sense to me. Cold air contains less moisture than warm air which is a byproduct of combustion anyway.
    It has nothing to do with moisture which is only relative anyway.
    The moisture in the combustion process doesn't come from the air it comes from the chemical reaction in the fuel during the combustion process.

    It revolves around the cold air being denser than the warmer air.

    Measured Performance more than just a buzzword

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •