Results 1 to 7 of 7

Thread: Damper

  1. #1
    Stephen G Sheldon's Avatar
    Stephen G Sheldon Guest

    Default Damper

    Recently inspected a house that had a single thermostat but had a switch on the wall outside the furnace room labelled "damper" with three settings: 1,2 and 3. Anyone seen anything like this before? Any suggestions on how to report on something like this?

    Similar Threads:
    Member Benefits1

  2. #2
    James Vincent's Avatar
    James Vincent Guest

    Default Re: Damper

    Sounds like a zoned HVAC duct system. Did you operate the damper while the A/C was on the determine if you were getting an increase or decrease in air flow to a certain section of the home?


  3. #3
    Stephen G Sheldon's Avatar
    Stephen G Sheldon Guest

    Default Re: Damper

    Could not get any change in air flow at different settings 1,2, or 3


  4. #4
    James Vincent's Avatar
    James Vincent Guest

    Default Re: Damper

    Sounds like remotely operated HVAC damper is not operating properly. Did you happen to spot a damper control unit on any of the duct work?


  5. #5
    Stephen G Sheldon's Avatar
    Stephen G Sheldon Guest

    Default Re: Damper

    No. Where would I look? The only accessible area would be immediately next to the furnace


  6. #6
    James Vincent's Avatar
    James Vincent Guest

    Default Re: Damper

    Is there ducts in attic or just between floors? Of course if it doesn't work it doesn't work. Sounds like you are- Unable to determine that HVAC Damper System is functioning properly...... You can Google Remote HVAC Dampers to get a better idea of what you are looking for. You could call your local HVAC Tech to see if they have ever come across such systems..


  7. #7
    Stephen G Sheldon's Avatar
    Stephen G Sheldon Guest

    Default Re: Damper

    Vincent, thanks for your help.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •