Results 1 to 3 of 3
  1. #1
    Join Date
    Mar 2007
    Location
    Philadelphia PA
    Posts
    3,177

    Default Tramex meter keeps beeping

    My Tramex Moisture Encounter Plus meter sometimes won't stop beeping after I pull it away from the material being tested. The only way I can get it to stop is to disconnect the battery. When I re-connect the battery it works normally again.
    Anyone else have this problem?
    I just emailed Tramex about it.

    Similar Threads:
    Inspection Referral
    "There is no exception to the rule that every rule has an exception." -James Thurber, writer and cartoonist (1894-1961)
    www.ArnoldHomeInspections.com

  2. #2
    Join Date
    Mar 2007
    Location
    Spring Hill (Nashville), TN
    Posts
    5,851

    Default Re: Tramex meter keeps beeping

    Quote Originally Posted by John Arnold View Post
    My Tramex Moisture Encounter Plus meter sometimes won't stop beeping after I pull it away from the material being tested. The only way I can get it to stop is to disconnect the battery. When I re-connect the battery it works normally again.
    Anyone else have this problem?
    I just emailed Tramex about it.
    Yes, I noticed that mine will do that as well but only after it has become hot sitting in my truck. I just turn it off and back on and it works fine. I do not have the Plus I have just have the Moisture Encounter..

    Scott Patterson, ACI
    Spring Hill, TN
    www.traceinspections.com

  3. #3
    Ron Bibler's Avatar
    Ron Bibler Guest

    Default Re: Tramex meter keeps beeping

    Did you try Banging it with a Knocking stick... Sometimes that helps...

    When was the last time you sent it off for recalibration ?

    Best

    Ron


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •