Results 1 to 20 of 20

Thread: Deck support

  1. #1
    mathew stouffer's Avatar
    mathew stouffer Guest

    Default Deck support

    I found this in a garage with a flat deck above it. It looks like a piece of angle iron bolted to the glue lam and foundatoin. Any thoughts on the installation.

    Similar Threads:
    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    Crawl Space Creeper

  2. #2
    Join Date
    Mar 2007
    Location
    Connecticut
    Posts
    1,828

    Default Re: Deck support

    Dosen't look good. Why? A solid post installed in the same place would have taken up 2 more inches and no problem. Thats alot of work to end up with what I would call an improper application even though it may last a long time with no problems.
    That is non pro, or mabey semi pro, yeah, semi pro


  3. #3
    Join Date
    Aug 2007
    Location
    Memphis TN.
    Posts
    4,311

    Default Re: Deck support

    Quote Originally Posted by mathew stouffer View Post
    I

    Any thoughts on the installation.
    .
    Home Made.
    .

    It Might have Choked Artie But it ain't gone'a choke Stymie! Our Gang " The Pooch " (1932)
    Billy J. Stephens HI Service Memphis TN.

  4. #4
    mathew stouffer's Avatar
    mathew stouffer Guest

    Default Re: Deck support

    It was crazy, the whole house was home made. I was getting overwhelmed, around each corner was some crazy configuration. Check some of these out. It is the first time I have seen a trap door installed on the return plenum

    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images

  5. #5
    Join Date
    Aug 2007
    Location
    Memphis TN.
    Posts
    4,311

    Default Re: Deck support

    Unapproved ( Galvanized ) Connectors.

    Not Properly Supported Ect.
    .

    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    It Might have Choked Artie But it ain't gone'a choke Stymie! Our Gang " The Pooch " (1932)
    Billy J. Stephens HI Service Memphis TN.

  6. #6
    mathew stouffer's Avatar
    mathew stouffer Guest

    Default Re: Deck support

    Billy,
    Check out the valves, I have never seen those on a manifold before.


  7. #7
    Join Date
    Mar 2007
    Location
    Oregon
    Posts
    2,365

    Default Re: Deck support

    Quote Originally Posted by mathew stouffer View Post
    It was crazy, the whole house was home made. I was getting overwhelmed, around each corner was some crazy configuration. Check some of these out. It is the first time I have seen a trap door installed on the return plenum
    All I can say is I'm glad it was you and not me

    I hate houses like this. Everything is uncommon.... some of it works, some doesn't. Of course the first question when you call something out as incorrect is "How long until I need to replace it?" - followed closely by "how much is it going to cost?" - followed by "do you have the name of a contractor that can do it for me?"

    This is really one of the biggest quandrys I run into in this job... something that is unconventional but is for the most part working. All the SOPs say I've done my job if it's working as inteneded. Every contractor that comes behind me will have a different idea of what MUST be done. The seller will sue me for saying it's wrong. The buyer will sue me for not saying it's wrong.

    Sorry for the rant.... it's been a long week.


  8. #8
    mathew stouffer's Avatar
    mathew stouffer Guest

    Default Re: Deck support

    I hear you, it's a pain in the ass. All the systems worked well, BUT.


  9. #9
    Join Date
    Sep 2008
    Location
    Texas
    Posts
    745

    Default Re: Deck support

    Quote Originally Posted by Billy Stephens View Post
    Unapproved ( Galvanized ) Connectors.
    Why are they unapproved? Galvanized fittings are allowed for water lines.

    Also this looks like an approved header for PEX.


  10. #10
    Join Date
    Mar 2007
    Location
    Spring Hill (Nashville), TN
    Posts
    5,851

    Default Re: Deck support

    PEX is not all that bad, those valves are common on that type of manifold. Yes, it could be supported a little more but.....

    Is that trap door so that the air filter can be changed?

    The untreated wood used for a support needs to go and looks like one of the bigger issues.

    As for the deck support? I would note that it is an unconventional method of support and unconventional things tend to act in unconventional ways! I would then put in the typical engineer recommendation. But, my gut feeling is that it is fine...

    Scott Patterson, ACI
    Spring Hill, TN
    www.traceinspections.com

  11. #11
    Join Date
    Aug 2007
    Location
    Memphis TN.
    Posts
    4,311

    Default Re: Deck support

    Quote Originally Posted by Wayne Carlisle View Post

    Why are they unapproved? Galvanized fittings are allowed for water lines.

    .
    .
    Are they Approved Connectors for Pex ?
    .


    It Might have Choked Artie But it ain't gone'a choke Stymie! Our Gang " The Pooch " (1932)
    Billy J. Stephens HI Service Memphis TN.

  12. #12
    mathew stouffer's Avatar
    mathew stouffer Guest

    Default Re: Deck support

    Yep the door is for the air filter.


  13. #13
    Join Date
    Mar 2007
    Location
    Kalamazoo, MI
    Posts
    117

    Default Re: Deck support

    Actually the angle iron post looks pretty good and appears to be well installed (i.e. well bolted to poured wall and beam). (A bit unusual for residential framing though). Looks like an engineering spec. Did you happen to see any deflection, sagging, etc. associated with it? I wouldn't have a problem with it if I didn't see any related issues (might just want to tell the clients to have it further evaluated by a specialist (i.e. engineer).

    RJDalga
    http://homeanalysts.com
    Kalamazoo, MI

  14. #14
    mathew stouffer's Avatar
    mathew stouffer Guest

    Default Re: Deck support

    There is a flat deck surface above the entire garage, yes it is a two car. The problem I have with it, is the area is North facing and the deck is flat. Very little sun in the winter and this area gets 400 to 500 inchs of snow a year. Moreover, all the snow from the metal roof slides onto the deck. So will it be able to handle the additional load. Doubt it, but is will be interesting to see


  15. #15
    Join Date
    Jul 2008
    Location
    Utah
    Posts
    390

    Cool Re: Deck support

    Quote Originally Posted by mathew stouffer View Post
    It was crazy, the whole house was home made. I was getting overwhelmed, around each corner was some crazy configuration. Check some of these out. It is the first time I have seen a trap door installed on the return plenum

    A plywood return plenum next to the furnace? I assume it is a furnace. You may want to check for mfr's recommendation for combustible surfaces that close to the furnace.


  16. #16
    Join Date
    Apr 2008
    Location
    Massachusetts
    Posts
    195

    Default Re: Deck support

    The steel angle is obviously there to support the end of the beam, but the steel "post" might have been an attempt at bracing the foundation against lateral load. (see: PowerBrace.net - Foundation Wall Bracing Systems)
    It looks like they might have cut a new opening in the wall and thought, for some reason, that the wall then needed bracing.
    Also, looks like somebody took a chisel or jackhammer to the top corner of the foundation and the corner of the opening, maybe to make room for the LVL, which suggest they might have been repairing some rot damage to the sill?
    We may never know...probably a homeowner with too much time on his hands


  17. #17
    Michael Schirmer's Avatar
    Michael Schirmer Guest

    Default Re: Deck support

    Though it doesn't qualify as a column, I would say it's OK in that it's secured to the concrete wall.


  18. #18
    Join Date
    Dec 2007
    Location
    Holladay, UT
    Posts
    577

    Default Re: Deck support

    We got off the subject of the deck support but here's a real beauty. All materials in one app. and yes that is polybutylene.

    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    Tom Rees / A Closer Look Home Inspection / Salt Lake City, Utah
    http://acloserlookslc.com/

  19. #19
    Join Date
    Feb 2009
    Location
    Southern Vancouver Island
    Posts
    4,607

    Default Re: Deck support

    Quote Originally Posted by Michael Schirmer View Post
    Though it doesn't qualify as a column, I would say it's OK in that it's secured to the concrete wall.
    I would not say that or put that in writing, only a structural engineer can do that. Better to play it safe in this case. Recommend having it checked out.


  20. #20

    Default Re: Deck support

    Just a general Deck Question for the group??
    What year (if any) were bolts required for the deck band joist against the home. Or asked another way when were lag bolts allowed instead of actual bolts and nuts to hold the deck band to the home???

    Jeff Zehnder - Home Inspector, Raleigh, NC
    http://www.jjeffzehnder.com/
    http://carolinahomeinspections.com/

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •