Results 1 to 13 of 13

Thread: Pex Manifold

  1. #1
    Gregg Austensen's Avatar
    Gregg Austensen Guest

    Question Pex Manifold

    Plumbers have just started using PEX in my area and I have only come across it a couple of times. The house today did not have a manifold and I cannot find anything that says it has to be there.

    Does it?

    If not what are the benifits for having it?

    Thanks

    Similar Threads:
    OREP Insurance

  2. #2
    Join Date
    Mar 2007
    Location
    Spring Hill (Nashville), TN
    Posts
    5,851

    Default Re: Pex Manifold

    Quote Originally Posted by Gregg Austensen View Post
    Plumbers have just started using PEX in my area and I have only come across it a couple of times. The house today did not have a manifold and I cannot find anything that says it has to be there.

    Does it?

    If not what are the benifits for having it?

    Thanks
    A manifold is not needed. They are a nice addition. They reduce the number of splices and connections. With a manifold you will have a dedicated line to the fixture.

    Scott Patterson, ACI
    Spring Hill, TN
    www.traceinspections.com

  3. #3
    Joshua Hardesty's Avatar
    Joshua Hardesty Guest

    Default Re: Pex Manifold

    Pex manifolds are nice for the end user but are a terrible waste of piping. Say you have your manifold 100 feet away from the master bath. Instead of having two main hot/cold lines run 90 feet, then the rest consists of pipes branching off it, you'd have 100 feet for the toilet, 200 feet for the tub, 200 feet for the shower, 200 feet for each sink, etc.


  4. #4
    Join Date
    Mar 2007
    Location
    Corpus Christi, TX
    Posts
    615

    Default Re: Pex Manifold

    Why couldn't you have a second set of manifolds at the bath?

    The only reason some people get lost in thought is because it's unfamiliar territory.
    - Paul Fix

  5. #5
    Join Date
    Mar 2007
    Location
    Colorado Springs, CO
    Posts
    1,217

    Default Re: Pex Manifold

    Quote Originally Posted by Thom Walker View Post
    Why couldn't you have a second set of manifolds at the bath?
    Access.

    "Baseball is like church. Many attend but few understand." Leo Durocher
    Bruce Breedlove
    www.avaloninspection.com

  6. #6
    Join Date
    Mar 2007
    Location
    Corpus Christi, TX
    Posts
    615

    Default Re: Pex Manifold

    For more info on designing PEX systems:
    http://www.toolbase.org/PDF/DesignGu...esignguide.pdf

    This stuff has pretty flexible design options. One is a remote mainfold system. If the manifolds are adjustable, an access must be present. If they are flow through they may be enclosed.

    The only reason some people get lost in thought is because it's unfamiliar territory.
    - Paul Fix

  7. #7
    Join Date
    Mar 2007
    Location
    Spring Hill (Nashville), TN
    Posts
    5,851

    Default Re: Pex Manifold

    Quote Originally Posted by Joshua Hardesty View Post
    Pex manifolds are nice for the end user but are a terrible waste of piping. Say you have your manifold 100 feet away from the master bath. Instead of having two main hot/cold lines run 90 feet, then the rest consists of pipes branching off it, you'd have 100 feet for the toilet, 200 feet for the tub, 200 feet for the shower, 200 feet for each sink, etc.
    Now Joshua, you are sounding like a builder! If I recall a similar argument was made by builders over the requirements for the instillation of EIFS!

    The manifolds have been proven to reduce the number of leaks by reducing the number of connections. Less connections equals less leaks with this type of system.

    Scott Patterson, ACI
    Spring Hill, TN
    www.traceinspections.com

  8. #8
    Join Date
    Mar 2007
    Location
    Myrtle Beach, South Carolina
    Posts
    341

    Default Re: Pex Manifold

    My home has a manifold. Everytime the kids are outside playing with the hose, I thank the plumber as I shut the water down for that hose bib.

    Critical Home Inspection Services
    www.Home2Spec.com

  9. #9
    Joshua Hardesty's Avatar
    Joshua Hardesty Guest

    Default Re: Pex Manifold

    Quote Originally Posted by Scott Patterson View Post
    Now Joshua, you are sounding like a builder! If I recall a similar argument was made by builders over the requirements for the instillation of EIFS!

    The manifolds have been proven to reduce the number of leaks by reducing the number of connections. Less connections equals less leaks with this type of system.
    ssshhhh... I am a builder. Well, a plumber anyways. I'll put in whatever the homebuyer or contractor pays me to put in.

    I'll never argue that fewer connections in a system results in fewer leaks, in any kind of pipe: Copper, pex, quest, cpvc, etc. But I do wonder, how these leaks happen, and why didn't they show up during the air test?


    Manifolds are a great convenience for the homeowner, but if they're building the house new they should realize all the extra time and money it takes to do it properly.


  10. #10
    Join Date
    Mar 2007
    Location
    Spring Hill (Nashville), TN
    Posts
    5,851

    Default Re: Pex Manifold

    Quote Originally Posted by Joshua Hardesty View Post
    ssshhhh... I am a builder. Well, a plumber anyways. I'll put in whatever the homebuyer or contractor pays me to put in.

    I'll never argue that fewer connections in a system results in fewer leaks, in any kind of pipe: Copper, pex, quest, cpvc, etc. But I do wonder, how these leaks happen, and why didn't they show up during the air test?
    Some reasons that I have discovered that the leaks do not show up during an air test is that the water weights the pipe and adds stress to the connection points. This happens more with PEX or CPVC. When a fixture is turned on & off the pipe moves, one of the reason the pipe is not to be be taught in the walls. It needs to be able to move.

    Trash, burrs, in the lines can also clog up small areas that will leak, then when the water washes over the area and removes whatever is clogging up the area you have a leak. Air will not do this, but the water moving through the pipe will.

    Scott Patterson, ACI
    Spring Hill, TN
    www.traceinspections.com

  11. #11
    Martin lehman's Avatar
    Martin lehman Guest

    Default Re: Pex Manifold

    I have yet to see a main manifold for this stuff, but I have seen a hot/cold line set connected to a "bathroom" manifold. This is a small manifold usually located in the attic space above the bathroom. Off this branches supply for the fixtures. Pretty neat...if they would only follow the instructions.


  12. #12
    Join Date
    Mar 2007
    Location
    Myrtle Beach, South Carolina
    Posts
    341

    Default Re: Pex Manifold

    Here you go........

    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    Critical Home Inspection Services
    www.Home2Spec.com

  13. #13
    Martin lehman's Avatar
    Martin lehman Guest

    Default Re: Pex Manifold

    Thanks Victor, I meant to say I have yet to see a main manifold on an actual inspection.
    Thanks


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •