Results 1 to 7 of 7

Thread: Dampers

  1. #1
    Brad Crump's Avatar
    Brad Crump Guest

    Default Dampers

    I have found out that dampers are supposed to be held open a quarter inch on gas fire places. I was told this is code that can be found in nfpa211...anybody know where? Thanks, Brad

    Similar Threads:
    Member Benefits1

  2. #2
    Join Date
    Mar 2007
    Location
    Philadelphia PA
    Posts
    3,177

    Default Re: Dampers

    Welcome Brad!
    Not trying to discourage you from asking, but this has been discussed many times, and often you can get info the quickest with a search.
    I came up with this very quickly:
    http://www.inspectionnews.net/home_i...mper-clip.html

    "There is no exception to the rule that every rule has an exception." -James Thurber, writer and cartoonist (1894-1961)
    www.ArnoldHomeInspections.com

  3. #3
    Brad Crump's Avatar
    Brad Crump Guest

    Default Re: Dampers

    thx for the info...srry i am new, didnt mean to ask the wrong stuff


  4. #4
    Join Date
    Mar 2007
    Location
    Philadelphia PA
    Posts
    3,177

    Default Re: Dampers

    Quote Originally Posted by Brad Crump View Post
    thx for the info...srry i am new, didnt mean to ask the wrong stuff
    No, no, no! You didn't ask the wrong stuff! As I said, I'm not trying to discourage you from asking. Ask, by all means. But there is a huge repository of info at your fingertips whereby you can often get answers very fast instead of waiting for someone to reply.
    Please don't be shy about asking! That's what the forum is all about.

    "There is no exception to the rule that every rule has an exception." -James Thurber, writer and cartoonist (1894-1961)
    www.ArnoldHomeInspections.com

  5. #5
    Join Date
    Mar 2008
    Location
    Charlotte NC
    Posts
    2,304

    Default Re: Dampers

    Quote Originally Posted by Brad Crump View Post
    I have found out that dampers are supposed to be held open a quarter inch on gas fire places. I was told this is code that can be found in nfpa211...anybody know where? Thanks, Brad
    Brad, Code Check HVAC shows it as IRC 1004.4 and UMC 912.1.2 if that helps.


  6. #6
    Join Date
    Mar 2007
    Location
    Philadelphia PA
    Posts
    3,177

    Default Re: Dampers

    Quote Originally Posted by Vern Heiler View Post
    Brad, Code Check HVAC shows it as IRC 1004.4 and UMC 912.1.2 if that helps.
    In the 2006 IRC, 1004.4 doesn't say anything about dampers.

    I think you have to go with the NFPA Table 10.6.2.3 for unlisted fireplaces. For listed fireplaces, you go by the manufacturer.

    You can view the NFPA 54 at

    http://www.nfpa.org/freecodes/free_a...nt.asp?id=5406 .

    Go to page 74.

    "There is no exception to the rule that every rule has an exception." -James Thurber, writer and cartoonist (1894-1961)
    www.ArnoldHomeInspections.com

  7. #7
    Brad Crump's Avatar
    Brad Crump Guest

    Default Re: Dampers

    Thanks for your help


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •