Results 1 to 3 of 3
  1. #1
    Join Date
    Mar 2007
    Location
    Ft. Myers, FL
    Posts
    363

    Default FPE main disconnect

    I did a house today that had a FPE main disconnect on the outside wall of house, 200 amp. On the other side of the wall was a newer Square D panel also with a 200 amp disconnect. I recommended replacement or just getting rid of the FPE main since there was one inside. The inside Square D was wired as a "sub" neutrals and grounds seperated and not bonded together. Is it ok to get rid of that FPE or should it be replaced with another 200 amp main outside...

    Similar Threads:
    Crawl Space Creeper
    Paul Kondzich
    Ft. Myers, FL.

  2. #2
    James Duffin's Avatar
    James Duffin Guest

    Default Re: FPE main disconnect

    I am not aware of any problems with the 200 FPE main breakers. If it is an isuue then it should be replaced with another 200 amp main unless the insde panel is made into the service panel.


  3. #3
    Join Date
    Mar 2007
    Location
    Philadelphia PA
    Posts
    3,177

    Default Re: FPE main disconnect

    As a generalist home inspector, I would question the FPE main and defer to an electrician.

    "There is no exception to the rule that every rule has an exception." -James Thurber, writer and cartoonist (1894-1961)
    www.ArnoldHomeInspections.com

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •