Results 1 to 5 of 5
  1. #1
    Jeff Eastman's Avatar
    Jeff Eastman Guest

    Default Rafter intersection

    Last edited by Jeff Eastman; 12-20-2007 at 09:12 AM.
    Inspection Referral

  2. #2
    Join Date
    Mar 2007
    Location
    Columbus GA
    Posts
    3,747

    Default Re: Rafter intersection

    It's not so important that the rafters are snug to each other, but rather that the rafters are snug to the ridge board.

    ' correct a wise man and you gain a friend... correct a fool and he'll bloody your nose'.

  3. #3
    Jim Hime's Avatar
    Jim Hime Guest

    Default Re: Rafter intersection

    That wouldn't work in a 110 mph or greater wind speed zone where I am at.
    Ridge board would need a metal strap down to the ridge brace.

    I'd also be concerned about the lack of fasteners in the shingles.


  4. #4
    Join Date
    Mar 2007
    Location
    Colorado Springs, CO
    Posts
    1,217

    Default Re: Rafter intersection

    Quote Originally Posted by Jim Hime View Post
    That wouldn't work in a 110 mph or greater wind speed zone where I am at.
    Jim,

    How about completing your profile so we can see where you are.

    "Baseball is like church. Many attend but few understand." Leo Durocher
    Bruce Breedlove
    www.avaloninspection.com

  5. #5
    Linda Swearingen's Avatar
    Linda Swearingen Guest

    Default Re: Rafter intersection

    That piece between the post and the intersecting rafters looks like an afterthought to me; as if the original construction was a peak (like maybe a turret, or a bay dining nook) which was starting to sag, and they put the post in to stop that process. If so, I'd be looking for possible spreading on the walls.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •