Results 1 to 8 of 8

Thread: deck stairs

  1. #1
    Join Date
    Jun 2008
    Location
    Maryland
    Posts
    1,096

    Default deck stairs

    How do you like this stringer attachment?

    Similar Threads:
    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    Crawl Space Creeper

  2. #2
    A.D. Miller's Avatar
    A.D. Miller Guest

    Default Re: deck stairs

    Quote Originally Posted by John Dirks Jr View Post
    How do you like this stringer attachment?
    JDJ: Wunerful, wunerful . . . .


  3. #3
    chris mcintyre's Avatar
    chris mcintyre Guest

    Default Re: deck stairs

    Quote Originally Posted by John Dirks Jr View Post
    How do you like this stringer attachment?
    Is this really that bad?


  4. #4
    Join Date
    Apr 2008
    Location
    Western Massachusetts
    Posts
    536

    Default Re: deck stairs

    Simpson LSCZ. They're not that expensive but most big box stores don't carry them therefore deck "builders" aren't likely to use them.


  5. #5
    Mickey Elias's Avatar
    Mickey Elias Guest

    Default Re: deck stairs

    Definitely should have a mechanical fastener such as a angle plate.


  6. #6
    Join Date
    Apr 2008
    Location
    Western Massachusetts
    Posts
    536

    Default Re: deck stairs

    Toenails are actually sufficient (well, when done properly they are - those in the photos do no fit that category) as the angle of stair stringers works to transfer some of the loads laterally at the deck. The problem with toenails is that I've never seen them done properly. Wrong fastener size, wrong angle, wrong spacing, wrong number, insufficient header, and insufficient top riser height are the usual culprits.

    I always use mechanical fasteners to attach stair stringers to the deck, whether they're inside or outside stringers. Why gamble?


  7. #7
    A.D. Miller's Avatar
    A.D. Miller Guest

    Default Re: deck stairs

    Toenails are actually sufficient
    CW: Not necessarily true. A nail's holding power is a function of its diameter, how far it penetrates the wood, and the type of wood it penetrates.

    And a framing nail is not just a framing nail. There are hand-driven nails, both common and box, and then there are the more often seen pneumatic nails with smaller shanks and some with clipped heads. All of these nails perform differently regarding their withdrawal strength load values.

    http://senco.com/pdf/facts/ner272.pdf

    It is also notable here that Senco, for one, recommends only stainless steel fasteners for framing exposed to the elements, especially when using pressure-treated lumber.

    The problem with toenails is that I've never seen them done properly.
    CW: I have, but no longer remember when.

    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images

  8. #8
    Join Date
    Apr 2008
    Location
    Western Massachusetts
    Posts
    536

    Default Re: deck stairs

    Quote Originally Posted by A.D. Miller View Post
    It is also notable here that Senco, for one, recommends only stainless steel fasteners for framing exposed to the elements, especially when using pressure-treated lumber.
    Yes, I have their stainless nails. Cost more than the tool if I recall...


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •