Results 1 to 6 of 6
  1. #1
    dan orourke's Avatar
    dan orourke Guest

    Default Plumb vent near valley

    Last edited by dan orourke; 01-02-2008 at 07:54 AM.
    Inspection Referral

  2. #2
    Join Date
    Oct 2003
    Location
    Rockwall Texas
    Posts
    4,521

    Default Re: Plumb vent near valley

    Being near the valley is not so much of a problem as it not flashed properly. I see some exposed nail heads too.

    Its a leaker if not already.

    Vent pipe doesn't appear to be painted either.

    Rick


  3. #3
    imported_John Smith's Avatar
    imported_John Smith Guest

    Default Re: Plumb vent near valley

    I agree with Rick. Its terribly flashed. Looks like amateur work. Could it be that a squirrel ate off the original flashing and the home owner covered it up with this Home Depot part.

    I wasn't aware of a requirement for painting vent pipe. I guess all the ones I see are covered. UV protection?


  4. #4
    Martin lehman's Avatar
    Martin lehman Guest

    Default Re: Plumb vent near valley

    Those Home Depot rubber gromets are a joke. These are a problem, not a solution.


  5. #5
    Brian E Kelly's Avatar
    Brian E Kelly Guest

    Default Re: Plumb vent near valley

    Where is it stated the PVC vent pipe must be UV protected (painted) I have only seen one or two painted and with in 1-3 years the paint is pealing off and looks like Hel_.


  6. #6
    Join Date
    Mar 2007
    Location
    Chicago, IL
    Posts
    2,797

    Default Re: Plumb vent near valley

    The valley needs to be flashed to a min 18" from the center, roof penetrations closer than this compromise the flashing.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •