Results 1 to 14 of 14
  1. #1
    Join Date
    Mar 2007
    Location
    Spring Hill (Nashville), TN
    Posts
    5,851

    Default PEX problems at a pre-drywall inspection

    The following pictures are from a pre-drywall inspection I performed this week. All AHJ inspections had been completed and they were installing insulation and drywalling in a couple of days.

    Test your skills with PEX products and see if you can find the problems in the pictures. Remember PEX products are installed to the manufacturers specifications (they are all about the same).

    Similar Threads:
    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    Inspection Referral
    Scott Patterson, ACI
    Spring Hill, TN
    www.traceinspections.com

  2. #2
    Join Date
    Mar 2007
    Location
    Spring City/Surrounding Philadelphia area
    Posts
    3,509

    Default Re: PEX problems at a pre-drywall inspection

    Looks like strapping support issues (or lack thereof) in pics 1,2, and 3 and also the pinching of the hot line in pic number 3 between the duct and stud wall. What is the strapping requirement for PEX?

    Pic #4 just looks like a bad idea running it run behind an electrical switch junction box.

    Pic #5 has no nail plates in front of where they run through the bottom plates of the stud wall (nor does the PVC drain line).


  3. #3
    Join Date
    Sep 2008
    Location
    Texas
    Posts
    745

    Default Re: PEX problems at a pre-drywall inspection

    You sure the plumber was through???
    The PEX isn't the only plumbing problem


  4. #4
    James Duffin's Avatar
    James Duffin Guest

    Default Re: PEX problems at a pre-drywall inspection

    It looks like the plumber was there and gone before the person who ran the vent.....at least I hope so! That is some sloppy work in all of the trades visible in the pictures!


  5. #5
    Join Date
    Mar 2007
    Location
    Spring Hill (Nashville), TN
    Posts
    5,851

    Default Re: PEX problems at a pre-drywall inspection

    Quote Originally Posted by Wayne Carlisle View Post
    You sure the plumber was through???
    The PEX isn't the only plumbing problem
    Yep, it was a really "Ruff" rough in! Out of state owner who put his trust into his builder, who is taking advantage of him.

    I have now been hired to visit the home several times over the next few months to how things are going! Should be a fun ride for the next few months!

    Scott Patterson, ACI
    Spring Hill, TN
    www.traceinspections.com

  6. #6
    Kary Krismer's Avatar
    Kary Krismer Guest

    Default Re: PEX problems at a pre-drywall inspection

    Is the second picture of a crawl space or a garage? Or asked better, what's the chance that area will need to be drywalled?


  7. #7
    Join Date
    Mar 2007
    Location
    Spring Hill (Nashville), TN
    Posts
    5,851

    Default Re: PEX problems at a pre-drywall inspection

    Quote Originally Posted by Kary Krismer View Post
    Is the second picture of a crawl space or a garage? Or asked better, what's the chance that area will need to be drywalled?
    It will be a finished basement with drywall and a suspended ceiling.

    Scott Patterson, ACI
    Spring Hill, TN
    www.traceinspections.com

  8. #8
    Join Date
    Nov 2007
    Location
    Chicago
    Posts
    548

    Default Re: PEX problems at a pre-drywall inspection

    Quote Originally Posted by Scott Patterson View Post
    It will be a finished basement with drywall and a suspended ceiling.
    remember the clearances from the can lights has to be 6" horizontal and 12" vertical.


  9. #9
    Join Date
    May 2009
    Location
    Massachusetts
    Posts
    6

    Default Re: PEX problems at a pre-drywall inspection

    Hi Scott,

    I see you are in TN, so my interpretation of the TN Home Inspector Standards of Practice requires my Report of the Plumbing system to be significantly deficient. The poor workmanship is likely to adversely affect the dwelling with premature plumbing failures. The deficiency should be repaired. As a new construction item, further evaluation is also recommend to be sure you receive full warranty benefits of the PEX plumbing. Obtain a copy of the PEX warranty and confirm the validity of the warranty with the manufacturer or manufacturer's rep.

    Detailed items of the observations inconsistent with the manufacturer's installation manual omitted for the InspectionNews posting reply. Looks like you already have the details covered.

    -Jim-
    Centsable Inspection


  10. #10
    David Bell's Avatar
    David Bell Guest

    Default Re: PEX problems at a pre-drywall inspection

    Also some firestopping issues thru the floors.


  11. #11
    Join Date
    Feb 2008
    Location
    Chicago IL
    Posts
    2,048

    Default Re: PEX problems at a pre-drywall inspection

    That's some really crappy work. Either the plumber is the lowest bidder or it's a developer subdivision house.
    Wanna take bets on how many drywall screws hit the PEX on this one

    www.aic-chicago.com
    773/844-4AIC
    "The Code is not a ceiling to reach but a floor to work up from"

  12. #12
    David Valley's Avatar
    David Valley Guest

    Default Re: PEX problems at a pre-drywall inspection

    While we are on the subject of PEX piping, did you all see what mice think of this product...

    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images

  13. #13
    Join Date
    Mar 2007
    Location
    Spring City/Surrounding Philadelphia area
    Posts
    3,509

    Default Re: PEX problems at a pre-drywall inspection

    Quote Originally Posted by David Valley View Post
    While we are on the subject of PEX piping, did you all see what mice think of this product...
    Wow! You don't see that happening with copper piping.


  14. #14
    Join Date
    Mar 2007
    Location
    Spring Hill (Nashville), TN
    Posts
    5,851

    Default Re: PEX problems at a pre-drywall inspection

    Quote Originally Posted by David Valley View Post
    While we are on the subject of PEX piping, did you all see what mice think of this product...
    Well that is a first for me.. That really does put a wrench in the gears of how good PEX is!

    How many times have you or anyone else found mouse modified PEX?

    Scott Patterson, ACI
    Spring Hill, TN
    www.traceinspections.com

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •