Window sill drain outlets

[RobertSmith]

In the photo, you see the drain outlet adjacent.

My heartburn is that there aren't any drain outlet on the outer edge of the metal window sill allowing the water to drain out. I guess the manufacturer thought it would just pond up then overflow.

Would you gues mention this in your report?

Similar Threads:

• Window seal problems! Help!
• Secondary drain setup
• lead drain
• condensate drain connection
• Leaking window

[John Kogel]

If you are talking about the little upturned lip at the extreme outer edge, hard to see here, I call for holes to be drilled. Been there, done that.

[Jerry Peck]

If you are talking about the little upturned lip at the extreme outer edge, hard to see here, I call for holes to be drilled. Been there, done that.

That little lip isn't that high, and I certainly would not call for holes to be drilled into or through it.

[John Kogel]

That little lip isn't that high, and I certainly would not call for holes to be drilled into or through it.

I relooked the pic and agree, you are probably correct, holes are not needed.

I was thinking of other windows mounted sideways which then needed drain holes added.

Drilling a window frame voids any warranty it may have had, so it is not the thing to do as a rule.