Results 1 to 3 of 3
  1. #1
    dan orourke's Avatar
    dan orourke Guest

    Default Thank the lord......

    ...........

    Similar Threads:
    Last edited by dan orourke; 01-02-2008 at 07:47 AM.
    Member Benefits1

  2. #2
    Join Date
    Mar 2007
    Location
    Near Philly, Pa.
    Posts
    1,682

    Smile Re: Thank the lord......

    They have some serious venting issues. Look at the disoloration. Also, where is the draft hood connector? I don't even see any screws.

    The manual should remain with the unit. If it is damaged then state it should be replaced.

    Keep the fire in the fireplace.

  3. #3
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,032

    Default Re: Thank the lord......

    In addition to what Bob H. said, that flexible copper line 'is reduced in size' and should not be used for the T&P discharge drain line.

    If you put photos in your report, that would be a good one to put in there.

    Bob H., question for you: Are those nylon/Teflon/whatever-type-plastic pieces in those flexible line connections allowed that close to the draft hood/vent? I've always been curious about that.

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •