Results 1 to 5 of 5
  1. #1
    brianmiller's Avatar
    brianmiller Guest

    Default Water heater vent termination on roof

    THe water heater vent ternimation on the roof was 16 inches. Should it not be 3ft?

    Similar Threads:
    Inspection Referral

  2. #2
    Join Date
    Mar 2007
    Location
    Philadelphia PA
    Posts
    3,177

    Default Re: Water heater vent termination on roof

    Depends on the slope of the roof, if I understand your question.

    "There is no exception to the rule that every rule has an exception." -James Thurber, writer and cartoonist (1894-1961)
    www.ArnoldHomeInspections.com

  3. #3
    brianmiller's Avatar
    brianmiller Guest

    Default Re: Water heater vent termination on roof

    Ha, yeah...that's right...it's a 4:12 pitch roof.


  4. #4

    Default Re: Water heater vent termination on roof

    12" min., and then based on the slope of the roof from there. Buttt.......... it also depends on the manufacturers installation instructions.


  5. #5
    Join Date
    Aug 2007
    Location
    Memphis TN.
    Posts
    4,311

    Default Re: Water heater vent termination on roof

    Figure 43 on page 21.
    .

    Attached Files Attached Files
    It Might have Choked Artie But it ain't gone'a choke Stymie! Our Gang " The Pooch " (1932)
    Billy J. Stephens HI Service Memphis TN.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •