Results 1 to 10 of 10

Thread: Sheathing

  1. #1
    Join Date
    Aug 2009
    Location
    New Jersey
    Posts
    10

    Default Sheathing

    Has any body seen this? It is inside the attic. Some kind of residue on the sheathing.

    Similar Threads:
    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    Crawl Space Creeper

  2. #2
    Join Date
    Feb 2009
    Location
    Southern Vancouver Island
    Posts
    4,607

    Default Re: Sheathing

    That could be a mould growth. It seems to be following along the dark line at the rafter as well. Hard to tell. Could it be blown-in insulation? Frost?

    John Kogel, RHI, BC HI Lic #47455
    www.allsafehome.ca

  3. #3
    Join Date
    May 2010
    Location
    No. San Diego Co., CA
    Posts
    562

    Default Re: Sheathing

    I would suspect mold growth - though it doesn't appear to be particularly widespread. Does it show on the other side of the rafter? Could be the sheathing was installed wet, or got wet before any roofing membrane was installed. Any moisture may have been trapped and perhaps drawn inside. Of course there could also be an active leak somewhere. How old is the roofing system?


  4. #4
    Join Date
    Aug 2009
    Location
    New Jersey
    Posts
    10

    Default Re: Sheathing

    Quote Originally Posted by John Kogel View Post
    That could be a mould growth. It seems to be following along the dark line at the rafter as well. Hard to tell. Could it be blown-in insulation? Frost?
    It is 50f in New Jersey and it's not blown in insulation. It's powdery and brushes right off. Could this be from an old leak? I tested the wood and it was all dry.


  5. #5
    Ted Williams's Avatar
    Ted Williams Guest

    Default Re: Sheathing

    Quote Originally Posted by Martin Muth View Post
    It is 50f in New Jersey and it's not blown in insulation. It's powdery and brushes right off. Could this be from an old leak? I tested the wood and it was all dry.
    This seems right to me, though maybe not from a leak. It could've just been bad storage at warehouse or on site. The way the sheathing is all furry it looks like it may have been extremely wet once, allowing the beginning mold growth, then quickly dried out after installation, killing the mold.

    Of course, I could be wrong.


  6. #6
    Join Date
    Aug 2009
    Location
    New Jersey
    Posts
    10

    Default Re: Sheathing

    Quote Originally Posted by John Kogel View Post
    That could be a mould growth. It seems to be following along the dark line at the rafter as well. Hard to tell. Could it be blown-in insulation? Frost?
    Quote Originally Posted by Ian Page View Post
    I would suspect mold growth - though it doesn't appear to be particularly widespread. Does it show on the other side of the rafter? Could be the sheathing was installed wet, or got wet before any roofing membrane was installed. Any moisture may have been trapped and perhaps drawn inside. Of course there could also be an active leak somewhere. How old is the roofing system?
    Quote Originally Posted by Ted Williams View Post
    This seems right to me, though maybe not from a leak. It could've just been bad storage at warehouse or on site. The way the sheathing is all furry it looks like it may have been extremely wet once, allowing the beginning mold growth, then quickly dried out after installation, killing the mold.

    Of course, I could be wrong.

    This is a townhouse built in 1987.


  7. #7

    Default Re: Sheathing

    Maybe FRT plywood?

    Is the sheathing delaminated at all, and is it original?
    Reason I ask is that I don't see moisture stains around the exposed nails, nor do I see much in the way of corrosion on the nails, which leads me to rule out the mold idea, but it's tough to tell from the pictures.


  8. #8
    Join Date
    May 2010
    Location
    No. San Diego Co., CA
    Posts
    562

    Default Re: Sheathing

    It certainly seems to be fungal / mold growth to me which looks newer than the 1987 date. Perhaps the roof leaked elswhere than above that particular unit and migrated to the area now observed. Were you able to physically check the integrity of the roof itself? Any signs of repair or existing defect?


  9. #9
    Join Date
    Aug 2010
    Location
    BC Canada
    Posts
    368

    Default Re: Sheathing

    Quote Originally Posted by Brandon Whitmore View Post
    Maybe FRT plywood?

    Is the sheathing delaminated at all, and is it original?
    Reason I ask is that I don't see moisture stains around the exposed nails, nor do I see much in the way of corrosion on the nails, which leads me to rule out the mold idea, but it's tough to tell from the pictures.

    POSITIVE


  10. #10
    Join Date
    Jul 2008
    Location
    Snowbird (this means I'm retired and migrate between locations), FL/MI
    Posts
    4,086

    Default Re: Sheathing

    Quote Originally Posted by Martin Muth View Post
    This is a townhouse built in 1987.
    I'm guessing you're seeing some evidence of past or present gypsum board or layer plus moisture and heat non-"exposure" side.

    What's on the other side of this plywood, exactly, layers (note minimal nail penetration). Proximity to common wall, parapet, etc. what is where?

    Suspect fire rated assembly.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •