Results 1 to 3 of 3
  1. #1
    Join Date
    Sep 2008
    Location
    so so, California
    Posts
    1,867

    Default Factory built raised hearth +

    Doesnt the material below the hearth, above the extension be non combust as well?
    Clerarance to FB face is 6" or 3.5? Also, I thought that no material was to make contact with the steel frame of the FB unit.
    FYI, I'm pretty sure this stuff was particle board

    Similar Threads:
    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    Member Benefits1

  2. #2
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,032

    Default Re: Factory built raised hearth +

    Major information missing from the above information ...

    Gas?

    Wood?

    ???



    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  3. #3
    Join Date
    Sep 2008
    Location
    so so, California
    Posts
    1,867

    Default Re: Factory built raised hearth +

    Its a factory built unit. Currently its set up for gas logs. I suppose it can burn solid fuel. I found out today that the seller told my buyer that he made the mantel / legs out of press board. I have some clearances but just looking to confirm.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •