Results 1 to 4 of 4
  1. #1
    Join Date
    Mar 2007
    Location
    Nampa, Idaho
    Posts
    601

    Question Scary looking vent pipe.

    This is in original 1930 oil furnace converted to gas. The flue pipe has a box or some type of damper installed. It is open on the bottom, I would think that something is missing here. Has anybody seen anything like this before?

    Similar Threads:
    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    Crawl Space Creeper

  2. #2
    David Banks's Avatar
    David Banks Guest

    Default Re: Scary looking vent pipe.

    I believe what you have there is a draft diverter that is on vent instead of part of furnace unit itself.


  3. #3
    Gary Schutta's Avatar
    Gary Schutta Guest

    Default Re: Scary looking vent pipe.

    That is an old draft diverter & should of been capped off so the new gas furnace will draft properly.

    Gary


  4. #4
    Join Date
    May 2007
    Location
    Frankfort, KY
    Posts
    326

    Default Re: Scary looking vent pipe.

    If that is a homemade drafthood it is as illegal as the day is long.

    It has to have an AGA stamp on it to be approved, besides a double acting barometric would be much more effective.

    Measured Performance more than just a buzzword

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •