Results 1 to 10 of 10
  1. #1
    Jon mackay's Avatar
    Jon mackay Guest

    Default Unconventional roof support

    Is there anything that would state the requirements for this type of installation?

    I don't know how to report on it other than to have a structural engineer go in and take a look..

    Has anyone run into this before?

    Similar Threads:
    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    Crawl Space Creeper

  2. #2
    Join Date
    Feb 2009
    Location
    Southern Vancouver Island
    Posts
    4,607

    Default Re: Unconventional roof support

    Its kind of ugly, but there's no sign of failure.
    If you need to CYA, do that, call for a structural engineer, or ask the seller to produce a permit for it.
    I'd tell them to keep it painted, or replace it with a nice post on a pier block.

    John Kogel, RHI, BC HI Lic #47455
    www.allsafehome.ca

  3. #3
    Join Date
    Aug 2007
    Location
    Memphis TN.
    Posts
    4,311

    Default Re: Unconventional roof support

    Quote Originally Posted by John Kogel View Post
    .
    Its kind of ugly, but there's no sign of failure.
    .
    .
    Except in The Roof Covering.
    ( as shown in Photo #4)
    .

    It Might have Choked Artie But it ain't gone'a choke Stymie! Our Gang " The Pooch " (1932)
    Billy J. Stephens HI Service Memphis TN.

  4. #4
    Join Date
    Sep 2009
    Location
    Rolla, MO
    Posts
    136

    Default Re: Unconventional roof support

    Jon

    The devil is in the details when checking the design of something like this you have to check every component and determine the weakest link:

    1.) pull-out capacity of the porch roof connection
    2.) tension capacity of the turn buckle
    3.) tension capacity of the rod
    4.) pull-out capacity of the connection the attic

    Plus this configuration will introduce a new force that is pushing into the front wall of the house where the porch is attached.

    Randy Mayo, P.E.
    Residential Engineering & Inspection Services
    http://www.rlmengineers.com

  5. #5
    Join Date
    Feb 2008
    Location
    Chicago IL
    Posts
    2,048

    Default Re: Unconventional roof support

    No sign of failure? Pic 2 seems to show the original sign of failure. That may be why they put the steel in.
    Beyond that I agree with Randy. Load transfers the walls, soffits and roof have been changed outside of original construction design.
    CYA, Arch or SE referral

    www.aic-chicago.com
    773/844-4AIC
    "The Code is not a ceiling to reach but a floor to work up from"

  6. #6
    Jon mackay's Avatar
    Jon mackay Guest

    Default Re: Unconventional roof support

    My thought was that the only way to verify the installation would be to have the original plans and specifications in hand since it is not a common installation.

    I was going to recommend review by an engineer just so they can check all the components involved.


  7. #7

    Default Re: Unconventional roof support

    Hope you report leaking also!


  8. #8
    chris mcintyre's Avatar
    chris mcintyre Guest

    Default Re: Unconventional roof support

    Even if it was designed by an engineer and installed according to specs there is water penetrating around the eye bolt which is causing damage to the rafters/blocking, which is a problem. I'm guessing no SE is going to say everything is ok even if you had the original plans and specs.


  9. #9
    Join Date
    Feb 2009
    Location
    Southern Vancouver Island
    Posts
    4,607

    Default Re: Unconventional roof support

    Quote Originally Posted by Billy Stephens View Post
    .
    Except in The Roof Covering.
    ( as shown in Photo #4)
    .
    Quote Originally Posted by Markus Keller View Post
    No sign of failure? Pic 2 seems to show the original sign of failure. That may be why they put the steel in.
    I knew that comment would draw flak.

    The failure of the roof in pic 4 is up on the main roof. Not the porch.
    The sinking post is on the left side, not the right. So yeah, maybe it needs 2 hangers, but it would still be ugly.

    Quote Originally Posted by chris mcintyre View Post
    Even if it was designed by an engineer and installed according to specs there is water penetrating around the eye bolt which is causing damage to the rafters/blocking, which is a problem. I'm guessing no SE is going to say everything is ok even if you had the original plans and specs.
    The failure of the roof is up on the main roof. Not the porch.
    There's no access to the attic of the porch roof, so we don't know if it's leaking. I'd note that in the report.

    John Kogel, RHI, BC HI Lic #47455
    www.allsafehome.ca

  10. #10
    Join Date
    Jul 2008
    Location
    Snowbird (this means I'm retired and migrate between locations), FL/MI
    Posts
    4,086

    Default Re: Unconventional roof support

    Makes for a nice lightening attractor.

    Not a proper method. DIY tree-surgeon type approach employed - No Good, whether supposed to support overhang or an attempt to straighten/plumb gable wall lean/failure. Suspect there is more (or rather less) going on behind the stacked matter. Definately defer to an engineer for evaluation of the wall, integrity of the chimney & its founation, review of roof superstructure/attic not just the porch/overhang projection.

    Last edited by H.G. Watson, Sr.; 03-19-2011 at 09:07 AM.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •