Results 1 to 7 of 7
  1. #1
    Join Date
    Mar 2007
    Location
    Chicago, IL
    Posts
    2,797

    Default Identification of fluorescent fixture/bulb type

    Never seen this one before, it appeared that the bulbs had side-mounted contacts at each end, but they did not remove readily, and I did not want to damage a bulb discovering how it installed.

    Could not locate anything like it on the net, and the local electrical supply house could not identify it based on a verbal description.

    Anyone know what I was looking at?

    Similar Threads:
    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    Member Benefits1
    Michael Thomas
    Paragon Property Services Inc., Chicago IL
    http://paragoninspects.com

  2. #2
    Join Date
    Dec 2008
    Location
    Maryland
    Posts
    2,809

    Default Re: Identification of fluorescent fixture/bulb type

    The light have a small nub on each end that a cap snaps onto, the cap has a leg extension that plugs into the fixture. 1940/50 light.

    Can cot give the actual name of it, sorry.


  3. #3
    Join Date
    Jul 2008
    Location
    Snowbird (this means I'm retired and migrate between locations), FL/MI
    Posts
    4,086

    Default Re: Identification of fluorescent fixture/bulb type

    Start off with what was the size/diameter of the tube and the length.Do you consider the color in the photo representative of the appearance? i.e. orange-yellow as opposed to green-ish white or bluish white light? (color index).Was there a starter present.Lets Work from there.


  4. #4
    Join Date
    Dec 2008
    Location
    Maryland
    Posts
    2,809

    Default Re: Identification of fluorescent fixture/bulb type

    If they are what I think they are.

    Hold the top and bottom of the light bulb,
    Pull away from wall fixture,
    There are insulators over the metal connectors that are a snap on(like a button).

    Bulbs were still available (few years ago) from high end lighting store that also did repairs.

    It is a screwy bulb that you do not see often. I had them in my house, built in 1939.
    Replaced a few times (expensive), then bought a new fixture (regular bulbs) for just a little more than replacement bulb.

    If you can still find them expect to pay $15 to $20 for replacement.


  5. #5
    Join Date
    Dec 2007
    Location
    Chico,Ca
    Posts
    454

    Default Re: Identification of fluorescent fixture/bulb type

    If the lamps are as some posters are saying, they are not flourescent they are "Lumiline" incandesant, rather rare thes days...


  6. #6
    Join Date
    Mar 2009
    Location
    Colorado Front Range
    Posts
    684

    Default Re: Identification of fluorescent fixture/bulb type

    Doing a search for "Lumiline" will bring up sources for the bulbs, and the special end caps that go with them. The pictures of the end caps give clues to how to remove the lamps, which shouldn't be attempted unless there's a problem as a broken lamp and end cap(s) can result in a $40 - $50 bill for material.

    I'd definitely note this as an obsolete fixture.


  7. #7
    Join Date
    Dec 2008
    Location
    Maryland
    Posts
    2,809

    Default Re: Identification of fluorescent fixture/bulb type

    Bill you have it. Could not remember name. You are more than right on obsolete. Short life span and expensive to replace.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •