Results 1 to 7 of 7
  1. #1
    Mike Brewer's Avatar
    Mike Brewer Guest

    Question WIRE NUTS / SPLICES IN CIRCUIT PANEL

    What is the ruling with having wire nuts to splice any wires in the panel box
    before it goes into the breaker, the original wire looks like it was to short to
    make it to the breaker, so they added a short piece to make the connection.

    Similar Threads:
    OREP Insurance

  2. #2
    Join Date
    Mar 2007
    Location
    Spring Hill (Nashville), TN
    Posts
    5,851

    Default Re: WIRE NUTS / SPLICES IN CIRCUIT PANEL

    A panel box is nothing more than a big junction box. Splices are OK as long as they are done correctly. It is very common to find splices in a panel box, exspecily when it has been upgraded.

    Scott Patterson, ACI
    Spring Hill, TN
    www.traceinspections.com

  3. #3
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,032

    Default Re: WIRE NUTS / SPLICES IN CIRCUIT PANEL

    Quote Originally Posted by Scott Patterson View Post
    A panel box is nothing more than a big junction box. Splices are OK as long as they are done correctly. It is very common to find splices in a panel box, exspecily when it has been upgraded.
    What Scott said, ... as long as ... those conductors terminate *in* the panel and do not 'pass through' the panel.

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  4. #4
    Join Date
    Mar 2007
    Location
    Spring City/Surrounding Philadelphia area
    Posts
    3,509

    Default Re: WIRE NUTS / SPLICES IN CIRCUIT PANEL

    Just check to be sure the spliced wires are of the same gauge and not mismatched. I've run into some splices inside panels lately where the 12 gauge wire connected to the 20 amp breaker was fine but the wire downstream of the splice was 14 gauge.


  5. #5
    Paul Tooley's Avatar
    Paul Tooley Guest

    Default Re: WIRE NUTS / SPLICES IN CIRCUIT PANEL

    all of the above, AND there can be no more than two wires in the wire nut...

    __________________________________
    shock therapy is fun...the first time


  6. #6
    Join Date
    Mar 2007
    Location
    Ridgewood, NJ
    Posts
    237

    Default Re: WIRE NUTS / SPLICES IN CIRCUIT PANEL

    What if the wire nut is rated for more than two wires?


  7. #7
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,032

    Default Re: WIRE NUTS / SPLICES IN CIRCUIT PANEL

    Quote Originally Posted by Paul Tooley View Post
    all of the above, AND there can be no more than two wires in the wire nut...
    Huh? Why not?

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •