Results 1 to 3 of 3
  1. #1
    Join Date
    Mar 2007
    Location
    Spring Hill (Nashville), TN
    Posts
    5,851

    Default No damper on a Heatilator

    I need some help. This Heatilator GB4942 with a 6" B-Vent flue did not have a damper in it. I could not find anything in the installation guidelines that says it even needed one. Any help would be great.

    Similar Threads:
    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    OREP Insurance
    Scott Patterson, ACI
    Spring Hill, TN
    www.traceinspections.com

  2. #2
    Join Date
    Mar 2007
    Location
    Near Philly, Pa.
    Posts
    1,682

    Smile Re: No damper on a Heatilator

    No damper required or approved for this unit. I went onto the Heatilator Dealer site and pulled up the most current manual, Rev. H. BTW, this unit started production 1/19/04 and is currently being produced. This size is known as a 42" Geneva. I know the engineer who designed this unit and I was a part of a cmte. reviewing facing options and revisions to the burner. The original burner was a little noisy. There is a high limit switch behind the removable hood, which is manual reset. These units can come in standing pilot or intermittent pilot ignition in NG or LP.

    HTH,
    Bob

    Keep the fire in the fireplace.

  3. #3
    Join Date
    Mar 2007
    Location
    Spring Hill (Nashville), TN
    Posts
    5,851

    Default Re: No damper on a Heatilator

    Thank you Bob! That is what I needed.

    Ya see, I tell folks all the time that every day is a learning experience!

    Scott Patterson, ACI
    Spring Hill, TN
    www.traceinspections.com

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •